Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-01-01-100-501 Party Company Process Cross Reference List
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
PW
References that begin with "SPOP" refer to Pratt and Whitney Service Process Operation Procedures in the Pratt and Whitney Standard Practices Manual PN 585005. Six-digit ATA Numbers (70-xx-yy) refer to sections in the Pratt and Whitney Standard Practices Manual PN 585005. References that begin with "PWA" refer to PWA specifications.
Party Company Specifications.
How to use.
SUBTASK 70-01-01-100-001
SUBTASK 70-01-01-990-002
IAE Control Number
PC Process Based On
Remarks
TASK 70-01-00
Observance of Manual Instructions
TASK 70-02-00
Dimensioning/Tolerancing/Feature Control System - Feature Control Symbols
ISO 1101
TASK 70-02-01
Fits and Clearances Standards
IAE (PW)
TASK 70-02-02
Specified Types of Damage
IAE (PW)
TASK 70-02-03
The procedure to do a Metal Temperature Analysis - Nickel-Base Alloys
PW SPM 70-36-00
IAE
TASK 70-02-04
Engine Damage Policy
PW SPM 70-00-00 INSP/CK-01
TASK 70-02-05
IAE 1480 Microstructure for Metal Temperature Analysis
PW SPM 70-36-00 INSP/CK-09
TASK 70-02-06
IAE 1484 Microstructure for metal temperature analysis
PW SPM 70-36-00 INSP/CK-12
TASK 70-02-07
Determination of Overheating Temperatures in Turbine Blades and Vanes (Nickel Base Alloys)
MTU MTV 1116
TASK 70-02-08
IN100 Microstructure for metal temperature analysis
MTU MTP184 Part 1
TASK 70-02-09
Inconel 713C Microstructure for metal temperature analysis
MTU MTP 184 Part 3
TASK 70-02-10
IAE 1442 Microstructure for metal temperature analysis
PW SPM 70-36-00
TASK 70-02-11
IAE 1440 Microstructure for metal temperature analysis
PW SPM 70-36-00
TASK 70-03-00
Special Handling of Materials + Solutions/Titanium Parts
IAE
TASK 70-04-00
Analysis of Fuels/Oils/Fluids
IAE
TASK 70-04-01
Approved Fuels
IAE
TASK 70-04-02
Approved Engine Oils
IAE
TASK 70-04-03
The Procedure to Identify Metal Particles
PW SPM 70-34-00
TASK 70-05-00
The Procedure to Identify and Control the Life of a Component
PW SPM 70-30-00
TASK 70-07-00
Abbreviations, Symbols
IAE
TASK 70-08-00
Conversion Tables
IAE
TASK 70-09-00
Procedure to Make Permanent Identification and Location Marks
PW SPM 70-11-00
TASK 70-09-01
Procedure to Make Temporary Marks on Components and Assemblies
PW SPM 70-11-00
TASK 70-09-02
Procedure to Electrolytically Make Marks
PW SPM 70-11-00, SPOP 401
TASK 70-09-03
Procedure To Apply Tamper-Proof Torque Mark On Threaded Fasteners
PW SPM 70-11-00
TASK 70-10-00
General Cleaning Information for the Engine Components During Maintenance
PW SPM 70-20-00
TASK 70-10-01
The Contamination of Engine Parts
RR SPM 70-00-01
TASK 70-11-03
Degrease Parts by Aqueous Cleaning
PW SPOP 209
TASK 70-11-04
Remove Silicone Rubber
PW SPOP 254
TASK 70-11-05
Paint Stripping of Components (Inorganic Method)
PW SPOP 258
TASK 70-11-06
One Step Alkaline Cleaning for Titanium
PW SPOP 18
TASK 70-11-08
Etching of Titanium Alloys
RR OP 133
SWAB Method only
TASK 70-11-11 DELETED
TASK 70-11-13
Cleaning of Components (Long Soak for Cobalt and Nickel Base Alloys and Heat and Corrosion Resistant Steels)
PW SPOP 203
TASK 70-11-18
Carbon Seal Handling (Cleaning, Lapping, Checking)
PW SPOP 215, SPOP 504
TASK 70-11-22
Cleaning of Bearings - Alkaline Method
PW SPOP 216
TASK 70-11-26
The Procedure to Locally Swab or Wipe Clean with Solvent
PW SPOP 208
TASK 70-11-29
Cold Acid Paint and Dry Film Lubricant Strippers
RR OP 103
TASK 70-11-34
Aqueous Degreasing (Silicated Degreaser)
70-11-03 can be used alternatively. Used as reference in 70-33-14
TASK 70-11-35
Protection of Coatings during Processing
70-38-24 can be used alternatively
TASK 70-11-39
Cold Ferric Chloride Etch
RR OP 214
Used as reference in 70-33-16 and 70-33-14 (SWAB Method only)
TASK 70-11-47
Methods of Testing of Cleaning and Plating Solutions
PW SPM 70-44-03
TASK 70-11-48
Make-up of Cleaning Solutions
TASK 70-11-49
Stock Loss Determination of Cleaning Solutions
PW SPM 70-23-00
TASK 70-11-50
Cleaning of the Exterior of the Engine
PW SPOP 1
TASK 70-11-51 DELETED
HPC Drum Repairs have the information
TASK 70-11-52
Removal of Carbon from Fuel and Oil Tubes (Bake-Method)
PW SPOP 201
TASK 70-11-53
The Procedure To Remove Carbon With An Aqueous-Based Carbon Remover
PW SPOP 207
TASK 70-11-54
Descaling of Components (Stainless Steel, Cobalt and Nickel Base Alloys)
PW SPOP 211, SPOP 213
TASK 70-11-55
Local Removal of Carbon by Alkaline Gel
PW SPOP 2
TASK 70-11-56
Cleaning Requirements After Chemical Contact with Fire Extinguishing Agents, Hydraulic Fluid, Oil or Fuel
PW SPOP 425
TASK 70-11-57
Cleaning of Contact Points and Wire Harnesses
PW SPOP 6
TASK 70-11-58
Cross Reference Tables to Cleaning and Plating Solutions
IAE
TASK 70-11-59
Procedure to Clean the Remaining Parts
PW SPM 70-00-00
TASK 70-11-60
Paint Stripping from Aluminum
PW SPOP 260
TASK 70-11-61
The Procedure to Clean an Engine of Bird Residue
RR OP 146
TASK 70-11-63
The procedure for Local Removal of Corrosion or Carbon from pits on aluminum alloy parts by alkaline gel.
PW SPOP 4
TASK 70-11-64
The procedure for Local Removal of RTV Silicone Rubber
PW SPOP 261
TASK 70-12-00
Abrasive Cleaning - General Info.
IAE
TASK 70-12-01
Wet Abrasive or Vapor Blasting with Aluminum Oxide
RR OP 104
TASK 70-12-02
Dry Non-metallic Abrasive Blasting with Aluminum Oxide
RR OP 104
TASK 70-12-03
Glass Bead Blasting
RR OP 104
TASK 70-12-06
Wet Abrasive Blast Clean with 240 or 320 Aluminum Oxide
PW SPOP 219
TASK 70-12-07
Dry Plastic Blasting
PW SPOP 19
TASK 70-12-08
Wet Abrasive Novaculite Blast
PW SPOP 9
TASK 70-12-09
Dry Abrasive 240/320 Grit Blast
PW SPOP 218
TASK 70-12-11
Dry Abrasive 500 Grit Blast
PW SPOP 10
TASK 70-12-12
Wet Glass Bead Cleaning
PW SPOP 16
TASK 70-12-13
Wet Abrasive 500 Grit Blast
PW SPOP 15
TASK 70-13-00
General Data on Ultrasonic Cleaning
IAE
TASK 70-13-02
Ultrasonic Cleaning of Air Cooled Turbine Airfoils and Duct Segments
PW SPOP 91
TASK 70-15-00
High Pressure Water Blasting - General Data
IAE
TASK 70-15-01
Stripping of Coatings by High Pressure Water Blasting
PW SPOP 322
TASK 70-20-00
Inspection - General Information
PW SPM 70-30-00 GENERAL-01
TASK 70-20-01
Inspection Policy and Inspection of Parts
RR SPM 70-31-00-200-000
TASK 70-21-00
The General Information for Visual Inspection
PW SPM 70-31-00 GENERAL-01
TASK 70-21-02
Non-destructive Testing on Steel Parts for Detecting Surface Abnormalities
FIAT 9009F
TASK 70-21-03
Examine the Remaining Parts
IAE
TASK 70-21-04
Visual Inspection of Carbon Rings and Face Seals
PW SPM 70-31-00
INSP/CK-07
TASK 70-22-02
Dimensional Rounding for Commercial Engines
TASK 70-22-03
Measurement of Surface Conditions
PW SPOP 127
RR OP 224
TASK 70-22-04
General Information on Gages
PW SPM 70-33-00
TASK 70-22-05
Skim Machine or Grind Repair of a Rotating or Static Part Surface
PW SPM 70-00-00
TASK 70-23-00
Fluorescent Penetrant Inspection General Information
IAE
TASK 70-23-01
Medium Sensitivity Post-emulsified Fluorescent Penetrant Inspection
IAE
TASK 70-23-02
Medium Sensitivity Water Washable Fluorescent Penetrant Crack Inspection
IAE
TASK 70-23-03
High Sensitivity Post-emulsified Fluorescent Penetrant Inspection
IAE
TASK 70-23-04
Ultra High Sensitivity Post-emulsified Fluorescent Penetrant Inspection
IAE
TASK 70-23-05
Local Application, Fluorescent Penetrant Inspection
IAE
TASK 70-23-08
High Sensitivity Water Washable Fluorescent Penetrant Inspection
IAE
TASK 70-24-00
Magnetic Particle Inspection - General Information
IAE
TASK 70-24-01
Magnetic Particle Inspection
IAE
TASK 70-25-00
Eddy Current Inspection General Data
IAE
TASK 70-25-01
Eddy Current Inspection
IAE
TASK 70-26-00
General Instructions on X-Ray Inspection Procedures
IAE
TASK 70-26-01
Radiographic Inspection Procedures
IAE
TASK 70-27-00
Ultrasonic Inspection - General Inspection
IAE
TASK 70-27-02
TASK 70-28-00
Heat Tint Test - General Information
IAE
TASK 70-28-01
Heat Tint Test
PW SPOP 90
TASK 70-28-02
Residual Fluoride, Chloride or Sodium Ions in Cavities of Blades or Vanes Recoated with PWA 73 Aluminum-Silicon Coating
IAE
TASK 70-29-00
Ball and Roller Bearing Inspection - General Information
PW SPM 70-35-00
TASK 70-29-01
The General Information for Ball and Roller Bearing Inspection
IAE
TASK 70-30-00
General Data
IAE
TASK 70-30-02
Supply of Honeycomb (AMS 5536, AMS 5540 Material Honeycomb, Nickel and Cobalt alloys)
PW PWA 123
TASK 70-31-00
Welding and Brazing
PW SPM 70-42-00, SPM 70-42-03
TASK 70-31-01
High, Intermediate and Low Temperature Brazing
RR OP 404
TASK 70-31-02
Argonarc Welding Repairs
RR OP 409
TASK 70-31-03
The Procedure for Electron-beam Welding
RR OP 414
TASK 70-31-04
Micro-plasma Weld Procedure
RR OP 415
TASK 70-31-06
The Procedure for Nickel Brazing
MTU AMS 2675
TASK 70-31-07
The Brazing Honeycomb Abradable Seal Structures
PW PWA 10, SPOP 404 (Visual Inspection), SPOP 405 (Deburring), SPOP 402 (Leak/video check)
TASK 70-31-08
The Procedure to Weld Hardface Material
MTU 242
TASK 70-31-09
Repair by Vacuum Brazing
MTU 337
TASK 70-31-10
Resistance Welding
PW PWA 15, SPM 70-42-02
TASK 70-31-13
The Different Procedures for Fusion Welding
PW PWA 16, SPM 70-42-01
TASK 70-31-02 can be used alternatively
TASK 70-31-14
Gold-Nickel Alloy Brazing
IAE
TASK 70-31-15
Nickel Brazing
PW PWA 36950-2, SPM 70-42-03
TASK 70-31-16
Nickel Alloy Brazing
PW PWA 36950-3, SPM 70-42-03
TASK 70-31-19
Removal of Brazing Flux
RR OP 406
TASK 70-31-20
Procedure to Prepare Surface for Brazing.
PW SPOP 403
TASK 70-32-00
Machining - General Instructions
IAE
TASK 70-32-01
Machine Reaming
RR OP 703
TASK 70-32-03
Finishing by Electrochemical or Electrodischarge Metal Removal
IAE (PW)
TASK 70-32-04
Laser Hole Drilling
PW PWA 119
TASK 70-32-06
Grinding of Titanium Parts
PW SPOP 530
TASK 70-32-07
Mechanical Removal or Finishing of Thermal Spray Coatings
PW SPOP 535
TASK 70-32-08
Coolants and Cutting Fluids
PW SPM 70-00-00 SOLNS-02
SPS 240
TASK 70-33-00
Stripping and Plating - General Data
IAE
TASK 70-33-02
Stripping and Plating of Chromium on Steel, Stainless Steel and Nickel Base Alloys
PW SPOP 22
TASK 70-33-04
Procedure For Test For Presence of Nickel Plate or Electroless Nickel Plate on a Part
PW SPOP 129
TASK 70-33-05
Stripping and Plating of Nickel on Steel
PW SPOP 29
TASK 70-33-06
Stripping and Plating of Nickel on Stainless Steel and Nickel Base Alloys
PW SPOP 26
TASK 70-33-08
Electroless Nickel Plating on Aluminum Base Alloys
MTU 276
TASK 70-33-16
Stripping and Plating of Silver on Steel, Stainless Steel and Nickel Base Alloys
PW SPOP 23, PW SPOP 24
TASK 70-33-17
Black Oxide Finishing
JAEC OP 313
AMS 2484
TASK 70-33-20
Anodic Coatings for Aluminum Base Alloys - Chromic Acid Process
RR OP 301
TASK 70-33-25
Electroless Nickel Plating on Titanium
PW SPOP 311
TASK 70-33-27
Make-up of Plating Solutions
IAE (PW)
TASK 70-33-28
Brush Nickel Plating
PW SPOP 321
TASK 70-33-51
Procedure to Make-Up of Conditioner Solution
IAE
TASK 70-33-58
Procedure to Remove Chromate and Anodized Layers
RR OP 106
TASK 70-33-59
Removal of Plasma and Flame Spray Coatings
RR OP 107
TASK 70-33-66
Stripping of CoCrAlY and NiCoCrAlY Protective Surface Coatings (PWA 265, PWA 286 from PWA 1455 Material)
PW SPOP 301
TASK 70-33-68
Nitric-Acid Stripping of PWA 73, 273 and 275 Aluminide Coatings from PWA 1455 and 1480 Parts
PW SPOP 308
TASK 70-33-76
Removal of IAE 70-38-10 (PWA 73), IAE 70-38-29 (PWA 273) and IAE 70-38-23 (PWA 275) from PWA 1447 and 1455 Material
PW SPOP 54
TASK 70-33-77
Stripping of IAE 264, 265, 281, 286 from IAE 647 and 1455 Material (same as TASK 70-33-66 except alternate Method)
PW SPOP 319
TASK 70-33-78
Stripping of Plasma and Flame Plate Coatings
PW SPOP 44
TASK 70-33-79
Stripping of Plasma and Flame Plate Coatings
PW SPOP 45
TASK 70-33-80
Nickel Stripping of Plasma Coatings
PW SPOP 48
TASK 70-33-86
Electrolytic Cleaning
RR OP 105
TASK 70-33-87
Electrolytic Etching of Steel Parts
RR OP 205
TASK 70-33-89
Nitric Acid Cleaning
RR OP 122
TASK 70-33-90
Stripping of IAE 53-5 Plasma Spray Chromium Carbide (Method M)
PW SPOP 324
TASK 70-33-91
Removal of Nickel Braze Material and Braze Filler from Stator Assemblies
PW SPOP 316
TASK 70-33-92
Nickel Electroplating
IAE
TASK 70-34-00
Plasma and Flame Spraying - General Information
IAE
TASK 70-34-01
Application of Sprayed Metal and Ceramic Coatings
RR OP 704
TASK 70-34-02
Flame Plate Application Chromium Carbide Coating
PW PWA 50 70-40-02 REPAIR-01
TASK 70-34-03
Thermal Spray Application Coating (IAE 53-5, IAE 271 and IAE 36206)
PW PWA 53/271/36206, SPM 70-46-00, SPM 70-46-02 thru -04, SPM 70-46-08
TASK 70-34-04
Seal, Abradable, Insulation, Plasma Deposition
PW PWA 280 propr.
TASK 70-34-10
Flame Spray Coating - Nickel Graphite
PW SPM 70-46-05 PWA 75-1
TASK 70-34-11
Plasma Spray Coating - Two Layer
PW PWA 264 propr.
TASK 70-34-12
IAE 265 Plasma Spray Coating
PW PWA 265 propr., SPM 70-46-05
TASK 70-34-13
Plasma Spray Coating - Multi Composition
PW PWA 286 propr.
TASK 70-34-14
IAE 261 Plasma Spray Coating
PW PWA 261 patented, SPM 70-46-05
TASK 70-34-15
Flame Spray Coating
PW PWA 74
TASK 70-34-16
Coating, Flame Deposition Tungsten Carbide (IAE 52)
PW PWA 52 propr.
TASK 70-34-18
Procedure to Prepare the Surface of Parts for Plasma Spray and Other Thermal Spray Coatings
PW SPOP 170
TASK 70-35-00
Miscellaneous Repairs - General Data
IAE
TASK 70-35-03
Blending and Buffing/Polishing Of Titanium, Steel, Nickel, Cobalt, or Aluminum Alloy Components
PW SPOP 533/532
TASK 70-35-04
Repair and Install Cupwashers
IAE (RR)
TASK 70-35-07
Procedure to Lap and Polish the Components
PW SPM 70-45-00 REPAIR-01
TASK 70-35-08
Install and Repair Wire Thread Insert
RR SPM 70-42-13-300-001
TASK 70-35-09
Surface Texture
PW PWA 362
TASK 70-35-11
Repair Shank Nuts
IAE (RR)
TASK 70-35-12
Repair Captive Nuts
IAE (RR)
TASK 70-35-14
Crack Stopper Holes
RR FRS 3255, SPM 70-42-26
TASK 70-35-17 DELETED
Use 70-35-03
TASK 70-35-19
Hole Radius Blending
PW SPOP 502
TASK 70-35-20
1st and 2nd Stage Turbine Blade Tip
PW PWA 36952 propr.
TASK 70-35-21 DELETED
Use 70-35-03
TASK 70-35-23
Nonmechanical Metal Removal
PW SPM 70-47-00
TASK 70-35-24
Repair Rigid Stainless Steel Tubes, Repair VRS7001
IAE
TASK 70-35-25
Repair of Harnesses VRS7002
IAE
TASK 70-35-26
Replace Damaged Unified Thinwall Self-Lock Inserts
RR SPM 70-42-13-300-002
TASK 70-35-27
Installation of Helical Coil Threaded Inserts
PW SPOP 415
For use on PW parts only. Not approved for RR parts because it uses double inserts and inserts without tangs
TASK 70-35-28
Removal of Broken Bolts or Studs
PW SPOP 416
TASK 70-36-00
Bonding and Molding
IAE
TASK 70-36-01
Procedure to apply Rubber Compounds
RR OP 346
TASK 70-36-02
Adhesive Bonding, Sealing and Filling Agents
RR OP 707
JAEC OP 707
TASK 70-36-03
Molding Process for Polyurethane Resin
JAEC JS 4008
TASK 70-36-04
Molding Process for Silicone Rubber Compound
JAEC JS 4009
TASK 70-36-06
Molding Process for Silicone Rubber Compound
JAEC JS 4011
TASK 70-36-07
Controlled-Environment Rooms
PW PWA 104
TASK 70-36-08
Procedure for Local Void Repair for Silicone Rubber
PW SPOP 131
TASK 70-37-00
Heat Treating - General Information
PW SPM 70-42-04
IAE
TASK 70-37-01
Stress-relief Cycle 12A
PW SPOP 465-2
TASK 70-37-03
Control of Heat Furnaces and Paint Ovens
RR OP 711
JAEC OP 711
TASK 70-37-04
Heat Treatment Atmospheres
PW PWA 11
TASK 70-37-06
Stress-relief Cycle 1
PW SPOP 455-1
TASK 70-37-07
Stress-relief Cycle 1A
PW SPOP 455-2
TASK 70-37-08
Stress-relief Cycle 4
PW SPOP 458-1
TASK 70-37-09
Stress-relief Cycle 4A
PW SPOP 458-2
TASK 70-37-10
Stress-relief Cycle 5
PW SPOP 459-1
TASK 70-37-11
Stress-relief Cycle 5A
PW SPOP 459-2
TASK 70-37-12
Stress-relief Cycle 6
PW SPOP 460-1
TASK 70-37-13
Stress-relief Cycle 6A
PW SPOP 460-2
TASK 70-37-14
Stress-relief Cycle 7
PW SPOP 461
TASK 70-37-15
Stress-relief Cycle 9
PW SPOP 459-3
TASK 70-37-16
Stress-relief Cycle 10
PW SPOP 463
TASK 70-37-17
Stress-relief Cycle 11
PW SPOP 464
TASK 70-37-18
Stress-relief Cycle 13
PW SPOP 466
TASK 70-37-19
Stress-relief Cycle 14
PW SPOP 467
TASK 70-37-20
Stress-relief Cycle 15
PW SPOP 468
TASK 70-37-21
Stress-relief Cycle 16
PW SPOP 469
TASK 70-37-22
Stress-relief Cycle 17
PW SPOP 470
TASK 70-37-23
Solution Heat Treat Cycle 20
PW SPOP 480
TASK 70-37-24
Solution Heat Treat Cycle 22
PW SPOP 482
TASK 70-37-25
Solution Heat Treat Cycle 15A
PW SPOP 472
TASK 70-37-26
Solution Heat Treat Cycle 18
PW SPOP 473
TASK 70-37-27
Precipitation Heat Treatment of Nickel Castings
PW SPOP 485
TASK 70-37-28
Stress-relief for Martensitic Corrosion Resistant Steels
PW SPOP 479
TASK 70-37-29
Stress-relief Cycle 12
PW SPOP 465-1
TASK 70-37-30
Stress-relief Cycle 7A
PW SPOP 461-1
TASK 70-37-31
Heat Treatment/Stress-relief After Welding
PW SPOP 462
TASK 70-37-32
Full Heat Treatment
PW SPOP 474-1
TASK 70-37-33
Solution Heat Treatment of IAE 1471 Cast Waspaloy
PW SPOP 493
TASK 70-38-00
Surface Treating - General Information
IAE
TASK 70-38-02
Application of Chromate Conversion Coatings for Aluminum
IAE (RR)
TASK 70-38-03
Application of Dry Film Lubricants
IAE (RR)
TASK 70-38-04
Abrasive Blasting and Shot/Glass Bead Peening for Fatigue Strength Improvement
RR OP 338
JAEC OP 338
70-38-13 can be used alternatively for shot peen only
TASK 70-38-05
Procedure To Apply Corrosion Inhibitor
PW SPOP 5
TASK 70-38-07
Application of Air Drying Primer (Epoxy Type) and Air Drying Enamel (Epoxypolyurethane)
RR OP 355
TASK 70-38-09
Aluminizing
PW PWA 44
TASK 70-38-10
Pack Process Application Aluminum-Silicon Coating
PW PWA 73 propr.
TASK 70-38-13
Shotpeening with Cast Steel Shot or Conditioned Steel Wire Shot
PW SPOP 501
70-38-04 can be used alternatively
TASK 70-38-14
Touch-up of Aluminide Layers
PW SPOP 159
70-38-41 can be used alternatively
TASK 70-38-15
Application of Antiseize, Antigalling Compound
PW SPOP 146, PWA 586
TASK 70-38-16
Bead Peening
PW SPOP 500
TASK 70-38-20
Application of Erosion and Heat/Corrosion Resistant Epoxy Silicone Paint Coating
JAEC OP 343
TASK 70-38-21
Application of High-Heat and Corrosion Resistant Coatings
RR OP 349
JAEC OP 349
TASK 70-38-23
Coating, Gas Phase Aluminum Deposition Process
PW PWA 275 propr.
TASK 70-38-24
Masking Procedures
PW SPOP 36
70-11-35 can be used alternatively
TASK 70-38-25
Superfinishing
RR OP 359
PW SPOP 186
TASK 70-38-26
Procedure to Touch-up CoCrAlY and NiCoCrAlY Aluminide Coatings with Cobalt-Aluminum Slurry
PW SPOP 158
TASK 70-38-27
Application of Dry Film Lubricants
PW SPOP 156
TASK 70-38-29
Coating, Pack Process Application
PW PWA 273 propr.
TASK 70-38-34
Application of Stoving Primer and Enamel (Epoxy Type)
RR OP 351
TASK 70-38-35
Application of High-Heat Resistant Aluminized Stoving Enamel
RR OP 341
TASK 70-38-36
Procedure to Remove of Plating Wax
PW SPOP 37
TASK 70-38-37
Use 70-38-05
TASK 70-38-38
Application of CoMat 10-129 Anti-Seize Paste (Non-leaded)
PW SPOP 169
TASK 70-38-39
Procedure to apply CoMat 10-130 Antigalling Compound
PW SPOP 139
TASK 70-38-40
Flap Peen
PW SPOP 505
TASK 70-38-41
Procedure For Touch-Up Of Diffused Aluminide
MTU 351-2
TASK 70-38-42
Procedure To Apply Heat And Corrosion-Resistant Aluminum
PW SPOP 141, SPOP 144, PWA 36252-1
TASK 70-38-43
Application Of CoMat 10-151 Antigallant Compound
PW SPOP 160
TASK 70-39-00
Machine Riveting - General Information
IAE
TASK 70-39-02
Hot Squeeze Riveting
RR OP 706
TASK 70-39-03
Riveting
PW SPM 70-43-00
TASK 70-40-00
Assembly/Installation - General Information
IAE
TASK 70-41-00
General Torque Tightening Techniques
IAE
TASK 70-41-01
Use of Torque Wrenches and Power Tools
PW SPM 70-52-00
RR SPM 70-51-00
TASK 70-41-02
Thread Torque Values
IAE Spec. 1001, 1003
TASK 70-42-03
Install the Tab-type Key Washers
PW SPM 70-53-00, PWA 318
IAE Spec. 1002
TASK 70-42-04
Cupwasher Installation
PW SPM 70-53-00, PWA 320
TASK 70-42-05
General Instructions for the Uses of Lock Wire
PW SPM 70-53-00, PWA 316
AS 567 to be used. IAE-Spec. 1009 to be incorporated.
TASK 70-42-06
The Staking of Components
PW SPM 70-53-00 PWA 361
TASK 70-42-07
Projection of Threads through Nuts
PW SPM 70-52-00
TASK 70-42-08
General Instructions for the Uses of Safety Cable
PW SPM 70-52-00, PWA 316
TASK 70-43-00
The Connection of Electrical Plugs During Engine Maintenance
IAE
TASK 70-43-01
Connection of Electrical Plugs
RR SPM 70-50-02
TASK 70-43-02
Installation of Open Wire Harnesses
Based on IAE 1009.
TASK 70-43-03
Application of Electrical Contact Enhancer For Wiring Harness
PW SPOP 430
TASK 70-44-00
Installation of Preformed Packings
PW SPM 70-00-00
TASK 70-45-00
Installation of Retaining Rings - General Data
IAE
TASK 70-45-01
Procedure to Install Retaining Rings
PW SPM 70-00-00 Assembly-09
TASK 70-46-00
Interference and Shrink Fits - General Information
IAE
TASK 70-46-01
Installation of Oversize Studs
PW SPM 70-00-00
TASK 70-46-02
Bushing Replacement
PW SPM 70-00-00
TASK 70-46-03
Installation of Rigid Tubes
RR SPM 70-12-01
TASK 70-46-04
Installation of Parts by Heating and Chilling
PW SPOP 423
TASK 70-47-00
V-Band Clamps - General Information
IAE
TASK 70-47-01
Fitting V-Band Clamps
IAE
TASK 70-50-00
Material Handling/Storage - General Information
IAE
TASK 70-51-00
Shipping - General Information
IAE
TASK 70-52-00
Receiving - General Information
IAE
TASK 70-53-00
General Instructions on the Handling of Bearings
PW SPM 70-35-00
TASK 70-53-01
Bearing Preservation
PW SPOP 217
TASK 70-53-02
Instructions for the Depreservation of Bearings
RR OP 112
TASK 70-53-03
Installation of Ball and Roller Bearings by Heating
PW SPOP 429
TASK 70-55-00
Storage - General Information
IAE
TASK 70-62-00
Preservation - General Information
IAE
TASK 70-63-00
Depreserving - General Information
IAE
TASK 70-63-02
General Instructions on the Repair of Surface Protection
RR SPM 70-42-17
TASK 70-64-00
Lubrication - General Information
IAE
TASK 70-64-01
Misuse of Molybdenum Disulfide Lubricants
IAE
TASK 70-64-02
Identification, Lubrication and Installation of Rubber Sealing Rings
IAE (RR)
TASK 70-72-00
Air Flow - General Information
IAE
TASK 70-72-01
Air Flow Testing - Turbine Blades and Vanes
PW SPM 70-38-00
TASK 70-72-02
Information on the Equipment Necessary to Air Flow Test Engine Parts
PW SPM 70-38-00