TASK 70-11-16-300-503 The Procedure For Heavy Duty Scale Removal from a Component (Chromium/Nickel Steel, Cobalt And Nickel Base Material) - DELETED

DMC:V2500-00-70-11-16-00A-251A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-11-16-300-503 The Procedure For Heavy Duty Scale Removal from a Component (Chromium/Nickel Steel, Cobalt And Nickel Base Material) - DELETED

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

  1. DELETED.

    This TASK has been deleted, refer to the SPM TASK 70-11-54-300-503

Requirements After Job Completion

Follow-On Conditions

NONE