DMC:V2500-00-70-11-29-00A-081A-DIssue No:001.00Issue Date:2013-03-20
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-11-29-100-501 Make-Up Of The Strippers And Solution To Remove Antigalling Compounds/Antiseize Compounds And Dry Film Lubricants
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Stainless steel tank | LOCAL | Stainless steel tank | (with approved plastic lining) | |
| High density polyethylene (LPE) tank | LOCAL | High density polyethylene (LPE) tank |
Consumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-271 PAINT STRIPPER | LOCAL | CoMat 01-271 | ||
| CoMat 01-272 PAINT STRIPPER | LOCAL | CoMat 01-272 |
Spares
NONESafety Requirements
WARNING
IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.
WARNING
YOU MUST ALWAYS USE PROTECTIVE CLOTHING WHEN YOU USE PAINT STRIPPER. THIS MUST INCLUDE RUBBER GLOVES AND GOGGLES.
WARNING
YOU MUST ALWAYS USE PAINT STRIPPER IN AN AREA WITH SUFFICIENT VENTILATION AND AWAY FROM HEAT OR FLAMES. THIS COULD CAUSE TOXIC MIXTURES.
WARNING
DO NOT DRINK PAINT STRIPPER. KEEP ALL FOOD AND DRINK AWAY FROM PAINT STRIPPER.
WARNING
IF YOU GET PAINT STRIPPER ON YOUR SKIN OR IN YOUR EYES, FLUSH IT IMMEDIATLY AND CONTINUOUSLY WITH LARGE QUANTITIES OF WATER. DO THIS FOR AT LEAST 15 MINUTES AND THEN GET MEDICAL AID.
WARNING
STORE PAINT STRIPPERS AWAY FROM OXIDES.
WARNING
For safety data see also the SPM TASK 70-11-00-110-501.
Procedure
CoMat 01-271 PAINT STRIPPER or CoMat 01-272 PAINT STRIPPER are used as received and no chemical control is required. Replenishment additions should be made weekly if the stripper is in regular use.
Weekly metal removal checks should be made as detailed in the SPM TASK 70-11-29-200-502. Discard the stripper as necessary and renew.
SUBTASK 70-11-29-100-001 Set-up of Paint Strippers