TASK 70-33-66-200-502 Test And Control Of The Solution Used In The Stripping Of MCrAlY Protective Surface Coatings From Nickel And Cobalt Alloys

DMC:V2500-00-70-33-66-00A-300A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-33-66-200-502 Test And Control Of The Solution Used In The Stripping Of MCrAlY Protective Surface Coatings From Nickel And Cobalt Alloys

Safety Precautions

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS. THESE CONTAIN INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

    1. SUBTASK 70-33-66-200-001 Test and Control of the CoCrAlY and NiCoCrAlY Stripping Solution - (Solution Code 90)

    2. There is no test and control procedure for the Solution Code 90.

    1. SUBTASK 70-33-66-200-002 Test and Control of the Tetrachloroethylene - (Perchlorethylene)

    2. This subtask is deleted.

Requirements After Job Completion

Follow-On Conditions

NONE