TASK 70-33-77-200-502 Control Of The Stripping Solution Used For Stripping Of IAE 264, 265 Or 281 Coating From IAE 647 And 1455 Material

DMC:V2500-00-70-33-77-00A-300A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-33-77-200-502 Control Of The Stripping Solution Used For Stripping Of IAE 264, 265 Or 281 Coating From IAE 647 And 1455 Material

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 70-33-77-220-001 Test and Maintenance of the Stripping Solution (Solution Code 67)

    2. NOTE

      Operating to exhaustion without replenishment is preferred. Discard the solution when it becomes ineffective or falls outside the operating limits, if not to be maintained.

      Refer to manufacturer's instructions to test and maintain the solution, as required.

    1. SUBTASK 70-33-77-200-002 Maintenance of the Amount of CoMat 01-344 Stripping Compound (solution A) in the Stripping Solution

    2. Deleted.

    1. SUBTASK 70-33-77-200-003 Maintenance of the Amount of CoMat 01-345 Stripping Compound (compound B) in the Stripping Solution

    2. Deleted.

Requirements After Job Completion

Follow-On Conditions

NONE