TASK 70-38-02-200-502 Control Of The Solutions Used For The Application Of Chromate Conversion Coatings For Aluminum

DMC:V2500-00-70-38-02-00A-300A-D|Issue No:003.00|Issue Date:2019-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-38-02-200-502 Control Of The Solutions Used For The Application Of Chromate Conversion Coatings For Aluminum

Introduction

Safety Precautions

CoMat 01-219 ACID ADDITION AGENT or CoMat 01-563 WETTING AGENT Solutions

Phosphoric Acid Solution

Conversion Brushing Solution

Conversion Dipping Solution

Conversion Drying-off Solution

Introduction

This task specifies the controls necessary for chromate conversion coating solutions.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
DELETEDLOCALDELETED

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MATERIAL MANUFACTURER'S SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS (THESE CONTAIN INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE HAZARD DATA, EXPLOSION HAZARD DATA, REACTIVITY HAZARD DATA, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, AND USE AND CONTROL MEASURES), AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

    1. SUBTASK 70-38-02-180-001 Control of Acid Addition Agent CoMat 01-219 or Wetting Agent CoMat 01-563 Solutions

    2. Analysis is not required. Discard the solution when it ceases to be effective.

    1. SUBTASK 70-38-02-180-002 Control of Phosphoric Acid Solution

    2. Analysis is not required. Discard the solution when it ceases to be effective.

    1. SUBTASK 70-38-02-180-003 Control of Conversion Brushing Solution

    2. Analysis is not required. Discard the solution when it ceases to be effective.

    1. SUBTASK 70-38-02-180-004 Control of Conversion Dipping Solution (Deleted)

    2. This subtask is deleted.

  1. SUBTASK 70-38-02-180-005 Control of Conversion Drying-off Solution (Deleted)

    This subtask is deleted.

    1. SUBTASK 70-38-02-200-001 Control of the Solutions (Deleted)

    2. This subtask is deleted.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the safety conditions and deleted subtask. (REA19VC381)

Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:DELETED
Type:sp01
Supply Short Name:DELETED
Supply Name:DELETED
Specification Groups:
Doc NumberType
DELETED
Suppliers:
ManufacturerRemarks
LOCAL