TASK 70-38-09-100-501 Make Up Of The Solution For The Aluminum Coating

DMC:V2500-00-70-38-09-00A-081A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-38-09-100-501 Make Up Of The Solution For The Aluminum Coating

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 03-126 CELLULOSE NITRATE SOLUTION77672CoMat 03-126
CoMat 03-127 ALUMINUM POWDERIE425CoMat 03-127
CoMat 03-346 CELLULOSE NITRATE SOLUTION77672CoMat 03-346

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

    1. SUBTASK 70-38-09-100-002 Make-up of the Aluminize Paint Slurry

      1. Composition.

      2. Use CoMat 03-126 CELLULOSE NITRATE SOLUTION or CoMat 03-346 CELLULOSE NITRATE SOLUTION at a concentration of 0.496 to 0.501 gal (1.88 to 1.90 l).

      3. Use CoMat 03-127 ALUMINUM POWDER at a concentration of 4.145 to 4.190 lb (1.88 to 1.90 kg).

      1. Preparation.

      2. Fill a suitable ball mill container with a minimum of 5 lb (2.27 kg) of 1in. (25.4 mm) diameter china milling balls or sufficient ball to fill the container one-third full.

      3. Put a measured by weight quantity of CoMat 03-127 ALUMINUM POWDER in to the container.

      4. Put a measured by volume quantity of CoMat 03-126 CELLULOSE NITRATE SOLUTION in to the container.

      5. Mill to a slurry for 2 hours at 10 to 18 rpm of container.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:77672
Enterprise Name:RANDOLPH PRODUCTS CO
BU Name:RANDOLPH PRODUCTS CO
Street:701 12TH STREET
City:CARLSTADT
Zip Code:NJ 07072
Country:USA
Phone Number:1-201-438-3700
Fax Number:1-201-438-4231
Internet:www.ourworld.compuserve.com
Manufacturer Code:IE425
Enterprise Name:DELETED
BU Name:DELETED,SEE CAGE CODE 3TTZ1
Manufacturer Code:77672
Supply Number:CoMat 03-126
Type:sp01
Supply Short Name:CoMat 03-126 CELLULOSE NITRATE SOLUTION
Supply Name:CoMat 03-126 CELLULOSE NITRATE SOLUTION
Specification Groups:
Doc NumberType
PMC 9737E-9456
Suppliers:
ManufacturerRemarks
77672
Manufacturer Code:IE425
Supply Number:CoMat 03-127
Type:sp01
Supply Short Name:CoMat 03-127 ALUMINUM POWDER
Supply Name:CoMat 03-127 ALUMINUM POWDER
Specification Groups:
Doc NumberType
PMC 9745NO. 400 (ATOMIZED)
Suppliers:
ManufacturerRemarks
IE425
Manufacturer Code:77672
Supply Number:CoMat 03-346
Type:sp01
Supply Short Name:CoMat 03-346 CELLULOSE NITRATE SOLUTION
Supply Name:CoMat 03-346 CELLULOSE NITRATE SOLUTION
Specification Groups:
Doc NumberType
PMC 9737E-9456 1035
Suppliers:
ManufacturerRemarks
77672