TASK 70-52-00-520-501 Receiving - General Information

DMC:V2500-00-70-52-00-00A-800A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Description

  1. TASK 70-52-00-520-501 Receiving - General Information

    WARNING

    IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

    1. Safety Precautions

    2. General

      1. Receiving is specified as the procedure necessary for any part, subassembly, assembly, engine modular parts or engine that you get for use.

      2. Examine parts as follows:

        1. Check the general and satisfactory conditions for start of repair/maintenance.

        2. If part is correct for repair/maintenance, record all defects by visual inspection.

        3. Make sure all supplied data is correct (that is, check that part number of received part is identical with receiving documents, inspect for missing parts).

        4. Specified instructions applied to the receiving of V2500 parts are contained in the applicable chapter/manual.