TASK 70-55-00-550-501 Storage - General Information

DMC:V2500-00-70-55-00-00A-812A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Description

  1. TASK 70-55-00-550-501 Storage - General Information

    1. General

      1. Examine the Engine/Module before installation in the applicable storage equipment. Make sure all the drain plugs are reinstalled and are safetied with lockwire. Reinstall all removed lines and torque the attached parts to the necessary values.

      2. Seal all component openings with the correct size plug or cap and cover all drive and bleed openings with the supplied covers.

      3. Spray all power transmitting components, such as splines, with the applicable engine oil lubricant before covering.

    2. Inspection of Storage Devices

      1. Before installation of the Engine/Module into a storage device, the device must be fully inspected. Make sure that the container, trailer, engine adaptors and all other equipment is there, is clean and has no structural or mechanical damage. Make sure all connection points are there and correctly attached. Only serviceable and storage devices that have all their parts, as applicable, must be used for storage of Engines/ Modules.