TASK 24-21-43-100-401 IDG Cables - Related Parts - Clean The IDG Cables Remaining Parts, Cleaning-001

DMC:V2500-A0-24-21-4300-02A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 24-21-43-100-401 IDG Cables - Related Parts - Clean The IDG Cables Remaining Parts, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-900

740-5925-505

01-910

740-5465-501

01-910

740-5465-503

01-920

740-5898-505

01-930

740-5892-505

01-940

740-5894-501

01-940

740-5894-503

01-950

740-5964-501

01-952

740-5965-501

01-952

740-5965-503

General

This TASK gives the procedure to clean the IDG cables remaining parts.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

NOTE

To identify the consumable materials refer to the PCI.

References

Refer to Cleaning - General Information, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 01-076 METHYL ETHYL KETONELOCALCoMat 01-076
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099
CoMat 02-102 BRUSH, PAINTLOCALCoMat 02-102

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 24-21-43-110-053 Clean the Components

      1. WARNING

        PUT ON PROTECTIVE CLOTHING, GOGGLES AND A FACE MASK WHEN YOU USE THIS CLEANING AGENT. DO NOT GET THE CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES. USE THE CLEANING AGENT IN A WELL VENTILATED AREA. DO NOT BREATHE THE GAS. IF YOU GET THE CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES FLUSH IT AWAY WITH WATER. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.

        Wipe all areas of the components.

        1. Remove the contamination from the components.

      2. Dry the components.

        1. Remove the dirty cleaning agent from the components before they are dry.

      3. Clean around the contours of the components.

        1. Remove all the contamination not removed in Step.

      4. Dry the components.

        1. Remove the dirty cleaning agent from the components before they are dry.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:CoMat 01-076
Type:sp01
Supply Short Name:CoMat 01-076 METHYL ETHYL KETONE
Supply Name:CoMat 01-076 METHYL ETHYL KETONE
Specification Groups:
Doc NumberType
METHYL ETHYL KETONE, TECHNICAL GRADE, CERTIFIED TO BSI BS 1940 OR ASTM D740, OR TT-M-261
Suppliers:
ManufacturerRemarks
LOCAL
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X
Manufacturer Code:LOCAL
Supply Number:CoMat 02-102
Type:sp01
Supply Short Name:CoMat 02-102 BRUSH, PAINT
Supply Name:CoMat 02-102 BRUSH, PAINT
Specification Groups:
Doc NumberType
PAINT-BRUSH
Suppliers:
ManufacturerRemarks
LOCAL