DMC:V2500-A0-24-21-4910-01A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 24-21-49-100-402 IDG Cooling Oil Tubes Remaining Parts - Clean the IDG Oil Cooling Tube Brackets, Cleaning-002
General
This TASK gives the procedure to clean the IDG oil cooling tube brackets. For other related parts refer to Cleaning-000 TASK 24-21-49-100-100 Component Maintenance Manual (CMM-THD-V2500-1IA).
Fig/item numbers in parentheses in the procedure agree with those used in the IPC.
NOTE
To identify the consumable materials refer to the PCI.
References
Refer to the SPM for data on these items.
Cleaning Policy, Refer to SPM TASK 70-10-00-100-501.
Cleaning Methods, Refer to SPM TASK 70-10-00-100-501.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-002 SOLVENT, DELETED. | 0AM53 | CoMat 01-002 | ||
| CoMat 02-099 LINT-FREE CLOTH | LOCAL | CoMat 02-099 | ||
| CoMat 02-102 BRUSH, PAINT | LOCAL | CoMat 02-102 |
Spares
NONESafety Requirements
NONEProcedure
Remove the dirty cleaning agent from the components before they are dry.
Dry the brackets.
Remove all the contamination not removed in Step.
Clean around the contours of the brackets.
Remove the dirty cleaning agent from the components before they are dry.
Dry the brackets.
SUBTASK 24-21-49-110-053 Clean the Brackets
WARNING
WHEN YOU USE CoMat 01-002 SOLVENT, DELETED. YOU MUST USE THE NECESSARY PROTECTIVE CLOTHING. DO NOT GET THE SOLVENT ON YOUR SKIN OR IN YOUR EYES. YOU MUST NOT SMOKE WHEN YOU USE THE SOLVENT AS THE VAPOR CHANGES AND BECOMES TOXIC.