DMC:V2500-A0-36-21-4900-00A-830A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 36-21-49-550-101 Bleed Air Pressure Indicating Air Tubes - Put The Tubes Into A Preservation Container, Storage-001
General
To identify the consumable materials, refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 02-005 ADHESIVE TAPE (MASKING) | LOCAL | CoMat 02-005 | ||
| CoMat 12-004 P.V.C. SHEET | LOCAL | CoMat 12-004 | ||
| CoMat 12-013 PRINTED, WAXED, VCI COATED PAPER | LOCAL | CoMat 12-013 |
Spares
NONESafety Requirements
NONEProcedure
Make sure blanking caps are installed on all openings of the tubes.
Put each tube into a container made of CoMat 12-004 P.V.C. SHEET together with CoMat 12-013 PRINTED, WAXED, VCI COATED PAPER.
Seal the container with CoMat 02-005 ADHESIVE TAPE (MASKING).
Part No.
Storage date.
Attach a label to the container which has the data that follows:
SUBTASK 36-21-49-550-051 Prepare the Pressure Indicating Tubes for Storage