DMC:V2500-A0-71-00-0000-15A-421A-BIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 71-00-00-810-022 The Fault Isolation Procedure For Starting Problems
General
The fault isolation procedure is shown in Figure, Figure, Figure, and Figure. Each step in the procedure is identified with a number. The steps on the left hand side give the fault sequence to be followed. The steps on the right hand side give the maintenance work that must be done to correct the fault.
In this TASK it is necessary to refer from one illustration to other illustrations. The other illustrations are identified by the 4th, 5th and 6th element numbers only - for example Fig 990-017-002.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Figure: Starting problems
Starting problems
Figure: Starting problems
Starting problems
Figure: Starting problems
Starting problems
Figure: Starting problems
Starting problems
