DMC:V2500-A0-71-51-4300-00A-251A-CIssue No:001.00Issue Date:2014-05-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 71-51-43-100-302 General Services Harness - Clean The Harness Remaining Parts, Cleaning-002
General
This TASK gives the procedure to clean the remaining parts of the general services harness.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
To identify the consumable materials refer to the PCI.
References
Refer to the SPM TASK 70-10-00-100-501 Cleaning - General Information.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-076 METHYL ETHYL KETONE | LOCAL | CoMat 01-076 | ||
| CoMat 02-099 LINT-FREE CLOTH | LOCAL | CoMat 02-099 | ||
| CoMat 02-102 BRUSH, PAINT | LOCAL | CoMat 02-102 |
Spares
NONESafety Requirements
NONEProcedure
Use a clean piece of the lint-free cloth.
Remove the dirty cleaning agent from the component before it is dry.
Dry the component
Remove all the contamination not removed in Step, above.
Clean around the contours of the component
Use a clean piece of lint-free cloth.
Remove the dirty cleaning agent from the component before it is dry.
Dry the component
SUBTASK 71-51-43-110-052 Clean the Remaining Parts
WARNING
DO NOT GET THE CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES. PUT ON PROTECTIVE CLOTHING, GLOVES, GOGGLES AND A FACE MASK. USE THE CLEANING AGENT IN A WELL VENTILATED AREA. DO NOT BREATHE THE GAS. IF YOU GET THE CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES, FLUSH IT AWAY WITH WATER, GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.