TASK 71-51-44-550-301 Ignition Supply Harness - Store The Harness, Storage-001

DMC:V2500-A0-71-51-4400-00A-810A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 71-51-44-550-301 Ignition Supply Harness - Store The Harness, Storage-001

General

To identify the consumable materials, refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-005 ADHESIVE TAPE (MASKING)LOCALCoMat 02-005
CoMat 12-004 P.V.C. SHEETLOCALCoMat 12-004
CoMat 12-019 IMPREGNATED PAPER0AM53CoMat 12-019
CoMat 12-021 PACKING MATERIALLOCALCoMat 12-021

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 71-51-44-550-057 Do the Harness Preservation Procedure

    1. There is no time limit for the shelf life if the storage facilities have temperature/humidity controls. Where temperature/humidity control is provided the harness insulation must be tested at regular times, refer to Testing-001 TASK 71-51-44-750-301. Do not keep the harness for a long time in damp, humid or extremes of temperature. Control the storage time so the particular harness is used as soon as possible.

    2. Install the applicable caps to all connectors to keep dust and moisture out.

    3. Make coils of the harness cables and attach them together with CoMat 12-021 PACKING MATERIAL.

    4. Put the harness in a polythene bag made from CoMat 12-004 P.V.C. SHEET and CoMat 02-005 ADHESIVE TAPE (MASKING). Put a sheet of CoMat 12-019 IMPREGNATED PAPER in the bag before you seal it.

    5. Attach a label to the bag with the assembly part number and storage date.

    6. Keep the harness in a store with a well ventilated dry atmosphere at a temperature between 40 to 100 deg F (4.5 to 37.5 deg C). The optimum temperature is 70 deg F (21 deg C).

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:CoMat 02-005
Type:sp01
Supply Short Name:CoMat 02-005 ADHESIVE TAPE (MASKING)
Supply Name:CoMat 02-005 ADHESIVE TAPE (MASKING)
Specification Groups:
Doc NumberType
OMAT: 2/94 (RR REF)AT 7 BLACK, WATERPROOF
Suppliers:
ManufacturerRemarks
LOCAL
U0415
K6835
Manufacturer Code:C4689
Supply Number:CoMat 12-004
Type:sp01
Supply Short Name:CoMat 12-004 P.V.C. SHEET
Supply Name:CoMat 12-004 P.V.C. SHEET
Specification Groups:
Doc NumberType
RENOLIT 5102411 or RENOLIT SKY MATT
Suppliers:
ManufacturerRemarks
C4689
V572V
Manufacturer Code:X111X
Supply Number:CoMat 12-019
Type:sp01
Supply Short Name:CoMat 12-019 IMPREGNATED PAPER
Supply Name:CoMat 12-019 IMPREGNATED PAPER
Specification Groups:
Doc NumberType
DELETED. USE COMAT 12‐013.
Suppliers:
ManufacturerRemarks
X111X
Manufacturer Code:U3173
Supply Number:CoMat 12-021
Type:sp01
Supply Short Name:CoMat 12-021 PACKING MATERIAL
Supply Name:CoMat 12-021 PACKING MATERIAL
Suppliers:
ManufacturerRemarks
U3173