Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 71-52-42-550-001 Fire Detection (System B) Harness - Store the Harness, Storage-001
General
To identify the consumable materials refer to the Consumable Materials Index.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 02-005 ADHESIVE TAPE (MASKING) | LOCAL | CoMat 02-005 | ||
| CoMat 12-004 P.V.C. SHEET | C4689 | CoMat 12-004 | ||
| CoMat 12-013B PRINTED, WAXED, VCI COATED PAPER | K6835 | CoMat 12-013B | ||
| CoMat 12-021 PACKING MATERIAL | U3173 | CoMat 12-021 |
Spares
NONESafety Requirements
NONEProcedure
There is no time limit for the shelf life if the storage facilities have temperature/humidity controls. Where temperature/humidity control is provided the harness insulation must be tested at regular times, refer to TASK 71-52-42-700-301 (Testing-001). Do not keep the harness for a long time in damp, humid or extremes of temperature. Control the storage time so the particular harness is used as soon as possible.
Install the applicable caps to all connectors to keep dust and moisture out.
Make coils of the harness cables and attach them together with CoMat 12-021 PACKING MATERIAL (PVC cable ties).
Put the harness in a polythene bag made from CoMat 12-004 P.V.C. SHEET and CoMat 02-005 ADHESIVE TAPE (MASKING). Put a sheet of CoMat 12-013B PRINTED, WAXED, VCI COATED PAPER in the bag before you seal it.
Attach a label to the bag with the assembly part number and storage date.
Keep the harness in a store with a well ventilated dry atmosphere at a temperature between 40 °F to 100 °F (4.5 °C to 37.5 °C). The optimum temperature is 70 °F (21 °C).
SUBTASK 71-52-42-550-051 Do the Harness Preservation Procedure