Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-00-300-011 HP Compressor Damper Wire Installation - Project Visit Maintenance, Repair-011 (VRS9658)
General
This document outlines the minimum engine teardown, inspection and re-build requirement to install damper wire during Project Visit Maintenance.
It is not intended to be utilized for normal shop visits for the purpose of scheduled engine/module overhaul or refurbishment where a full on-wing interval is expected. This procedure alone does not permit any module/assembly, to be zero-timed (time since LEVEL 3 maintenance).
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
The proprietary nature of this repair requires that any facility not authorized to accomplish this repair contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility. Contact the following, and refer to the latest approved revision of EA18VG148.
IAE International Aero Engines AG
400 Main Street
M/S 121-10
East Hartford CT 06118
U.S.A.
Email: gpiaecomms@iaev2500.com
Attn: IAE Repair Council