DMC:V2500-A0-72-00-4050-02A-520A-BIssue No:001.00Issue Date:2014-05-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-40-050-003 HP System Module Components - Remove The P3/T3 Sensor, Removal-013
General
This TASK gives the procedure to remove the P3/T3 sensor from the HP system module.
Remove and discard the lockwire before parts are disconnected or removed.
Discard the gasket removed in this procedure.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants, refer to the IPC.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 10-058 PENETRATING OIL | 0AM53 | CoMat 10-058 |
Spares
NONESafety Requirements
NONEProcedure
Refer to Figure.
Apply CoMat 10-058 PENETRATING OIL to the three bolts that attach the sensor to the diffuser case assembly.
SUBTASK 72-00-40-050-052 Remove the P3/T3 Sensor
Figure: Remove the P3/T3 sensor
Remove the P3/T3 sensor
