DMC:V2500-A0-72-00-5002-00A-647A-CIssue No:001.00Issue Date:2014-05-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-50-300-003 LPT Module - Front Lock Nut - Re-apply Silver Plate, Repair-003 (VRS1117)
General
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Plating facilities | LOCAL | Plating facilities |
Consumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Refer to TASK 72-00-50-100-000(CLEANING-000).
Remove the old silver plating if necessary.
SUBTASK 72-00-50-110-059 Remove the Old Silver Plating
The front lock nut is plated all over.
Plating thickness to be 0.00008 to 0.0003 in. (0.002 to 0.008 mm).
Refer to TASK 70-33-16-300-503.
Silver plate the front lock nut.
Refer to TASK 70-33-16-300-503 SUBTASK 70-33-16-300-011.
Bake the front lock nut.
SUBTASK 72-00-50-380-051 Silver Plate the Front Lock Nut
Refer to TASK 70-33-16-300-503.
Refer to TASK 72-00-50-200-000 (INSPECTION-000).
Visually examine the plated surface.
SUBTASK 72-00-50-220-147 Examine the Front Lock Nut