TASK 72-00-60-100-007 External Gearbox Module - External Gearbox Module Remaining Parts - Clean, Cleaning-007

DMC:V2500-A0-72-00-6007-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-60-100-007 External Gearbox Module - External Gearbox Module Remaining Parts - Clean, Cleaning-007

Effectivity

FIG/ITEM

PART NO.

01-162

4T0229

01-180

4W0164

01-300

4P0250

01-405

4W0004

01-455

4W0004

01-705

4W0003

General

This TASK gives the procedure to clean the remaining parts of the external gearbox module. For the other parts of the external gearbox module, refer to TASK 72-00-60-100-000 (CLEANING-000).

The practices and processes referred to in the procedure by the TASK/SUBTASK number are in the SPM.

References

Refer to the SPM for data on these items:

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-00-60-110-073 Clean the Parts

    1. Remove the grease. Refer to the SPM TASK 70-11-03-300-503

Requirements After Job Completion

Follow-On Conditions

NONE