DMC:V2500-A0-72-31-1300-00A-257A-C|Issue No:001|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-31-13-300-006 LPC Fan Blade Front Retaining Ring - Apply The Yellow Paint On The Timing Mark, Repair-006 (VRS1173)

Effectivity

FIG/ITEM	PART NO.
01-160	5A6079
01-160	5A0898

Material of component

PART IDENT	SYMBOL	MATERIAL
Front blade retaining ring		Titanium alloy

General

Price and availability - none

NOTE

To identify the consumable materials, refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

Name	Manufacturer	Part Number / Identification
CoMat 01-031 ACETONE (CH3)2CO	LOCAL	CoMat 01-031
CoMat 01-124 ISOPROPYL ALCOHOL	LOCAL	CoMat 01-124
CoMat 02-018 BRUSH, PAINT	LOCAL	CoMat 02-018
CoMat 08-123 TWO PACK EPOXY FINISH,BSC 356	LOCAL	CoMat 08-123
CoMat 08-124 CATALYST FOR GLOSS FINISHES,CSH 553	0AM53	CoMat 08-124
CoMat 05-019 WATERPROOF SILICON CARBIDE	LOCAL	CoMat 05-019
CoMat 05-020 WATERPROOF SILICON CARBIDE	LOCAL	CoMat 05-020
CoMat 05-021 WATERPROOF SILICON CARBIDE	44197	CoMat 05-021

Spares

NONE

Safety Requirements

NONE

Procedure

1. Refer to Figure.
2. 1. Use CoMat 05-019 WATERPROOF SILICON CARBIDE, CoMat 05-020 WATERPROOF SILICON CARBIDE and/or CoMat 05-021 WATERPROOF SILICON CARBIDE.
3. 1. Use CoMat 01-031 ACETONE (CH3)2CO or CoMat 01-124 ISOPROPYL ALCOHOL.
1. Refer to Figure.
2. 1. Use CoMat 08-123 TWO PACK EPOXY FINISH,BSC 356 and CoMat 08-124 CATALYST FOR GLOSS FINISHES,CSH 553.
3. 1. Use CoMat 02-018 BRUSH, PAINT.
4. Cure the yellow paint for a minimum of 4 hours at room temperature.

Repair details

Requirements After Job Completion

Follow-On Conditions

NONE

Manufacturer Code:	0AM53
Enterprise Name:	IAE INTERNATIONAL AERO ENGINES AG
BU Name:	NULL
Building:	SUITE 400
Street:	628 HEBRON AVENUE
City:	GLASTONBURY
State:	CT
Zip Code:	06033
Country:	USA

Manufacturer Code:	44197
Enterprise Name:	SAINT-GOBAIN INDUSTRIAL CERAMICS INC.
BU Name:	SAINT-GOBAIN ABRASIVES, INC
Street:	ONE NEW BOND STREET
P.O. Box:	PO BOX 15008
City:	WORCESTER
State:	MA
Zip Code:	01615-0008
Country:	USA
Phone Number:	1-508-795-5000
Fax Number:	1-508-795-2828
Internet:	www.saint-gobain-northamerica.com

Manufacturer Code:	LOCAL
Enterprise Name:	LOCALLY SUPPLIED

Manufacturer Code:

LOCAL

Supply Number:

CoMat 01-031

Type:

sp01

Supply Name:

CoMat 01-031 ACETONE (CH3)2CO

Specification Groups:

Doc Number	Type
OMAT: 150 (RR REF)	COMMERCIAL GRADE O-A-51
PMC 9008 (PW REF)	COMMERCIAL GRADE O-A-51
JCR-041 (JAEC REF)	COMMERCIAL GRADE O-A-51
MTH 169 (98%) (MTU REF)	COMMERCIAL GRADE O-A-51

Suppliers:

Manufacturer	Remarks
LOCAL
K6835
81348
K3504
U1185
24853
70657

Manufacturer Code:

LOCAL

Supply Number:

CoMat 01-124

Type:

sp01

Supply Name:

CoMat 01-124 ISOPROPYL ALCOHOL

Specification Groups:

Doc Number	Type
OMAT:1/40	GPR TECHNICAL GRADE
PMC 9094	GPR TECHNICAL GRADE
JCR-011	GPR TECHNICAL GRADE

Suppliers:

Manufacturer	Remarks
LOCAL
U1185
24853
K6835

Manufacturer Code:

LOCAL

Supply Number:

CoMat 02-018

Type:

sp01

Supply Name:

CoMat 02-018 BRUSH, PAINT

Specification Groups:

Doc Number	Type
	PENCIL SIZE NO.6 ARTIST PAINT BRUSH (CAMEL HAIR OR SQUIRREL HAIR)

Suppliers:

Manufacturer	Remarks
LOCAL
K6835
76071

Manufacturer Code:

1E1X8

Supply Number:

CoMat 05-019

Type:

sp01

Supply Name:

CoMat 05-019 WATERPROOF SILICON CARBIDE

Specification Groups:

Doc Number	Type
OMAT: 5/31 (RR REF)	WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 400 (ANSI B74.18)
JCR-184 (JAEC REF)

Suppliers:

Manufacturer	Remarks
1E1X8
LOCAL
K6835

Manufacturer Code:

1E1X8

Supply Number:

CoMat 05-020

Type:

sp01

Supply Name:

CoMat 05-020 WATERPROOF SILICON CARBIDE

Specification Groups:

Doc Number	Type
OMAT: 5/33 (RR REF)	WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 320 (ANSI B74.18)
JCR-027 (JAEC REF)
JCR-186 (JAEC REF)

Suppliers:

Manufacturer	Remarks
1E1X8
LOCAL
K6835

Manufacturer Code:

1E1X8

Supply Number:

CoMat 05-021

Type:

sp01

Supply Name:

CoMat 05-021 WATERPROOF SILICON CARBIDE

Specification Groups:

Doc Number	Type
OMAT: 5/35 (RR REF)	WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 240 (ANSI B74.18 )
JCR-188 (JAEC REF)

Suppliers:

Manufacturer	Remarks
1E1X8
K6835
LOCAL

Manufacturer Code:

LOCAL

Supply Number:

CoMat 08-123

Type:

sp01

Supply Name:

CoMat 08-123 TWO PACK EPOXY FINISH,BSC 356

Specification Groups:

Doc Number	Type
MSRR 9064 (RR-REF)	IP9064/3560 IP9064/CAT
OMAT: 799A	IP9064/3560 IP9064/CAT

Suppliers:

Manufacturer	Remarks
LOCAL
K3054
IE200

Manufacturer Code:

0AM53

Supply Number:

CoMat 08-124

Type:

sp01

Supply Name:

CoMat 08-124 CATALYST FOR GLOSS FINISHES,CSH 553

Specification Groups:

Doc Number	Type
DELETED

Suppliers:

Manufacturer	Remarks
0AM53

TASK 72-31-13-300-006 LPC Fan Blade Front Retaining Ring - Apply The Yellow Paint On The Timing Mark, Repair-006 (VRS1173)

Export Control

Copyright

Applicability

Common Information

TASK 72-31-13-300-006 LPC Fan Blade Front Retaining Ring - Apply The Yellow Paint On The Timing Mark, Repair-006 (VRS1173)

Effectivity

Material of component

General

NOTE

Preliminary Requirements

Pre-Conditions

Support Equipment

Consumables, Materials and Expendables

Spares

Safety Requirements

Procedure

SUBTASK 72-31-13-380-051 Prepare the Paint Surface of the Front Blade Retaining Ring

SUBTASK 72-31-13-380-052 Apply the Yellow Paint on the Timing Mark

Figure: Repair details

Repair details

Requirements After Job Completion

Follow-On Conditions