TASK 72-31-13-200-000 LPC Fan Blade Front Retaining Ring - The Table Of Task Numbers/Data Modules

DMC:V2500-A0-72-31-1300-01A-002A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-31-13-200-000 LPC Fan Blade Front Retaining Ring - The Table Of Task Numbers/Data Modules

General

The part number table gives the breakout, configuration and TASK number where the applicable data for a part is given. It is given to help find the procedure only.

Before starting a procedure, refer to EFFECTIVITY statement contained in each TASK to make sure of the approved procedure part number applicability.

FIG/ITEM

PART NO.

BREAKOUT

CONFIG

TASK NO.

01-160

5A0898

01

02

01-160

5A6079

01

01

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE