DMC:V2500-A0-72-32-0007-00A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-00-100-007 Seal Ring - Clean, Cleaning-007
General
This TASK gives the procedure to clean the seal ring.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
Reference
Refer to the SPM TASK 70-10-00-100-501 Cleaning - General Information.
NOTE
To identify the consumable materials refer to the PCI.
Other consumable materials are given in the SPM.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-005 SOLVENT CLEANER | 72190 | CoMat 01-005 | ||
| CoMat 02-099 LINT-FREE CLOTH | LOCAL | CoMat 02-099 |
Spares
NONESafety Requirements
NONEProcedure
Use CoMat 01-005 SOLVENT CLEANER. Use a soft bristle brush or swab.
Remove the soft dirt and dust. Refer to the SPM TASK 70-11-14-300-503
Use clean dry air blast or CoMat 02-099 LINT-FREE CLOTH.
Dry.
SUBTASK 72-32-00-110-061 Clean the Seal Ring to Remove the Soft Dirt and Dust