DMC:V2500-A0-72-32-0323-00A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-03-100-010 Fan Frame Drain Pipe - Clean, Cleaning-010
General
This TASK gives the procedure to clean the drain pipe.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
References
Refer to the SPM for data on these items.
Cleaning - General Information TASK 70-10-00-100-501.
Make-up of the Solutions to Mild Clean (All Metals) TASK 70-11-03-100-501.
The Test and Control of the Solutions to Mild Clean (All Metals) TASK 70-11-03-200-502.
The Procedure to Mild Clean (All Metals) TASK 70-11-03-300-503.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Remove the grease and unwanted particles. Refer to the SPM TASK 70-11-03-300-503
SUBTASK 72-32-03-110-066 Remove the Grease and Unwanted Particles