TASK 72-32-05-300-001 PTO Carrier Seal - Blend Repair, Repair-001 (VRS1183)

DMC:V2500-A0-72-32-0504-00A-649A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-05-300-001 PTO Carrier Seal - Blend Repair, Repair-001 (VRS1183)

Effectivity

FIG/ITEM

PART NO.

01-170

5A1328

01-170

5A0427

Material of component

RR

DESCRIPTION

SYMBOL

MATERIAL

PTO carrier seal

Titanium alloy

General

Price and availability - not applicable

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Penetrant crack test facilityLOCALPenetrant crack test facility
Portablegrinding equipmentLOCALPortable grinding equipment
Abrasive wheelLOCALAbrasive wheel

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 05-019 WATERPROOF SILICON CARBIDELOCALCoMat 05-019
CoMat 05-020 WATERPROOF SILICON CARBIDELOCALCoMat 05-020
CoMat 05-021 WATERPROOF SILICON CARBIDE44197CoMat 05-021

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-05-350-051 Dress the Damage from the PTO Carrier Seal

      1. CAUTION

        TITANIUM COMPONENTS.
        SILICONE CARBIDE TYPE WHEELS, STONES AND ABRASIVE PAPERS ARE TO BE USED FOR THIS REPAIR.
        ALUMINIUM OXIDE TYPES MUST NOT BE USED.
        THE MATERIAL WILL OXIDIZE AND CRACK IF MECHANICAL CUTTERS ARE USED HEAVILY. THIS HAS OCCURRED IF THE COMPONENT SHOWS DARK STRAW TO BLUE DISCOLOURATION. IF AT ANY TIME THIS COLORATION OCCURS THE PTO CARRIER SEAL MUST BE REJECTED.

        Dress to remove nicks, scratches and galls.

      1. Use the portable grinding equipment and the abrasive wheel or the fine file.

        Refer to Figure.

        Refer to the SPM TASK 70-35-03-300-501.

      2. Blend the dressed area and polish out scores.

      1. The surface finish of the repair surfaces must be the same as the adjacent area.

        Refer to Figure.

        Refer to the SPM TASK 70-35-03-300-501.

    2. SUBTASK 72-32-05-220-065 Examine the PTO Carrier Seal

      1. Visually examine the repaired area for nicks, scratches and galls.

      1. No cracks, scratches and galls are permitted.

        Refer to TASK 72-32-05-200-000 (INSPECTION/CHECK-000).

    3. SUBTASK 72-32-05-230-053 Examine the PTO Carrier Seal

      1. Fluorescent penetrant examine the repaired area.

      1. No cracks are permitted.

        Refer to the SPM TASK 70-23-05-230-501.

    4. Figure: Blend repair of the PTO carrier seal

    Blend repair of the PTO carrier seal

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:44197
Enterprise Name:SAINT-GOBAIN INDUSTRIAL CERAMICS INC.
BU Name:SAINT-GOBAIN ABRASIVES, INC
Street:ONE NEW BOND STREET
P.O. Box:PO BOX 15008
City:WORCESTER
State:MA
Zip Code:01615-0008
Country:USA
Phone Number:1-508-795-5000
Fax Number:1-508-795-2828
Internet:www.saint-gobain-northamerica.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:1E1X8
Supply Number:CoMat 05-019
Type:sp01
Supply Short Name:CoMat 05-019 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-019 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/31 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 400 (ANSI B74.18)
JCR-184 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-020
Type:sp01
Supply Short Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/33 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 320 (ANSI B74.18)
JCR-027 (JAEC REF)
JCR-186 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-021
Type:sp01
Supply Short Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/35 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 240 (ANSI B74.18 )
JCR-188 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
K6835
LOCAL
Manufacturer Code:LOCAL
Tool Number:Abrasive wheel
Tool Name:Abrasive wheel
Manufacturer Code:LOCAL
Tool Number:Penetrant crack test facility
Tool Name:Penetrant crack test facility
Manufacturer Code:LOCAL
Tool Number:Portable grinding equipment
Tool Name:Portablegrinding equipment