TASK 72-32-25-300-003 No. 3 Bearing Seal Ring Holder - Replace The Anti-Rotation Pin, Repair-003 (VRS3390)

DMC:V2500-A0-72-32-2501-00A-920A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-25-300-003 No. 3 Bearing Seal Ring Holder - Replace The Anti-Rotation Pin, Repair-003 (VRS3390)

Effectivity

FIG/ITEM

PART NO.

02-230

2A1288

02-230

2A1790

General

Material of component

RR

DESCRIPTION

SYMBOL

MATERIAL

No. 3 bearing seal ring holder

Housing Aluminum alloy

Pin

Stainless Steel

Price and availability - refer to IAE

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Torque wrench: range 36 - 220 lbfin (4.0 - 24.9 Nm)LOCALTorque Wrench 36 - 220

Consumables, Materials and Expendables

NONE

Spares

NameManufacturerPart Number / IdentificationQuantityRemark
No. 3 bearing seal ring pin2A1787AR

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-25-350-058 Remove the Damaged or Loose Pins from the No. 3 Bearing Seal Ring Holder Assembly

    1. Refer to Figure.

    2. Remove the damaged or loose pins (up to four locations).

    2. SUBTASK 72-32-25-350-059 Replace all Pins Removed from the No. 3 Bearing Seal Ring Holder Assembly

    1. Refer to Figure.

    2. Install all pins removed for looseness or damage (up to four locations).

    3. Torque the pins to 85 to 95 lbfin (9.604 to 10.734 Nm).

    3. SUBTASK 72-32-25-220-103 Examine all Pins Replaced by this No. 3 Bearing Seal Ring Holder Assembly Repair

    1. Refer to Figure.

      2. Inspect all pins replaced by this repair (up to four locations).

      1. Refer to Figure.

    4. Figure: No. 3 bearing seal ring holder assembly pin replacement

    No. 3 bearing seal ring holder assembly pin replacement

Requirements After Job Completion

Follow-On Conditions

NONE
Link not Found
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Link not Found
Manufacturer Code:LOCAL
Tool Number:Torque Wrench 36 - 220
Tool Name:Torque wrench: range 36 - 220 lbfin (4.0 - 24.9 Nm)