TASK 72-32-25-300-010 No. 3 Bearing Face Seal - Restore The Hardface, Repair-010 (VRS3395)

DMC:V2500-A0-72-32-2502-00A-970A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-25-300-010 No. 3 Bearing Face Seal - Restore The Hardface, Repair-010 (VRS3395)

Effectivity

FIG/ITEM

PART NO.

02-150

2A1786

02-150

2A3854

02-150

2A4286

Material of component

PART IDENT

SYMBOL

MATERIAL

No. 3 bearing face seal

AMS6322 or AMS6323 steel

General

Price and availability - refer to IAE

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Workshop inspection equipmentLOCALWorkshop inspection equipment

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-047 TAPE, HEAT REFLECTIVE52152CoMat 02-047

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The proprietary nature of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

      International Aero Engines, AG
      400 Main Street
      M/S 121- 10
      East Hartford, CT 06118
      USA
      Attn: Manager Technical  Services

    2. Authorized repair vendors for VRS3395 are listed below:

      PRAXAIR SURFACE TECHNOLOGIES
      1234 Atlantic Street
      North Kansas City, MO 64116
      USA

    3. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work, and accepts no responsibility whatsoever for any work that may be carried out by a vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

    2. Figure: Repair Details and Dimensions

    Repair Details and Dimensions

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:52152
Enterprise Name:3M COMPANY
BU Name:3M CENTER
Department:INDUSTRIAL TAPE AND SPECIALTIES DIV.
Street:BUILDING 220-7W-03
City:ST. PAUL
State:MN
Zip Code:55144-1000
Country:USA
Phone Number:1-651-733-1110, 1-800-362-3550, 1-800-223-7427
Fax Number:1-651-737-4380
Internet:www.mmm.com, www.3m.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-047
Type:sp01
Supply Short Name:CoMat 02-047 TAPE, HEAT REFLECTIVE
Supply Name:CoMat 02-047 TAPE, HEAT REFLECTIVE
Specification Groups:
Doc NumberType
If CoMat 02- 047 is specified with no suffix, use one of the CoMat 02-047 letter suffix alternative materials.
Suppliers:
ManufacturerRemarks
X222X
Manufacturer Code:LOCAL
Tool Number:Workshop inspection equipment
Tool Name:Workshop inspection equipment