DMC:V2500-A0-72-32-3700-00A-251A-CIssue No:002.00Issue Date:2018-05-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-37-100-301 Fan Speed/Trim Balance Probes Electrical Harness - Clean The Harness, Cleaning-001
General
This TASK gives the procedure to clean the fan speed/trim balance probes harness.
The practices and processes referred to in the procedure by the TASK number are in the SPM.
Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
References
Refer to the SPM for data on these items.
Cleaning - General Information, SPM TASK 70-10-00-100-501.
Make-up of the Solution to Solvent Clean (All Metals), SPM TASK 70-11-14-200-502.
The Test and Control of the Solutions to Solvent Clean (All Metals), SPM TASK 70-11-14-200-502.
The Procedure to Solvent Clean (All Metals), SPM TASK 70-11-14-300-503.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-005 SOLVENT CLEANER | 72190 | CoMat 01-005 |
Spares
NONESafety Requirements
NONEProcedure
Refer to SPM TASK 70-11-14-300-503.
Apply the cleaner to the harness with a spray gun.
Use clean dry-air blast.
NOTE
Make sure there are no remaining solvent cleaner in the harness.
Dry the harness.
SUBTASK 72-32-37-110-051 Chemically Clean the Fan Speed/Trim Balance Probes Harness