DMC:V2500-A0-72-32-5102-00A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-51-100-002 Front Seal Runner Ring - Clean, Cleaning-002
General
This TASK gives the procedure to clean the front seal runner or the nut ring. For the other parts of the LP stub shaft and rotor center, refer to TASK 72-32-51-100-000.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
Reference
Refer to the SPM TASK 70-10-00-100-501 Cleaning - General Information.
NOTE
Consumable materials are given in the SPM TASK 70-11-03-300-503.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Standard cleaning equipment | LOCAL | Standard cleaning equipment |
Consumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Clean. Refer to the SPM TASK 70-11-03-300-503
SUBTASK 72-32-51-110-054 Clean the Front Seal Runner or the Nut Ring