TASK 72-32-52-100-001 No. 2 Bearing - Clean, Cleaning-001

DMC:V2500-A0-72-32-5200-00A-251A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-52-100-001 No. 2 Bearing - Clean, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-100

5R6002

01-100

5R6004

01-160

5R6003

01-160

5R6005

General

This TASK gives the procedure to clean the No. 2 roller bearing assembly.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Refer to the SPM TASK 70-10-00-100-501 Cleaning - General Information.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-52-110-051 Clean the No. 2 Roller Bearing Assembly

      1. Clean. Refer to the SPM TASK 70-11-22-300-503

      1. Two-step carbon solvent and pressure flush cleaning (demountable, semi-demountable and main bearings).

Requirements After Job Completion

Follow-On Conditions

NONE