DMC:V2500-A0-72-32-5403-00A-243A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-54-300-004 No. 1 Bearing Nut - Apply Dry Film Lubricants, Repair-004 (VRS1299)
General
This repair TASK gives the procedure for application of dry film lubricants.
Price and availability
Refer to IAE for any of these items.
Tools
Repair parts
Repair of spares
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 02-001 ADHESIVE TAPE (MASKING) | LOCAL | CoMat 02-001 | ||
| CoMat 10-002 DRY FILM LUBRICANT | LOCAL | CoMat 10-002 |
Spares
NONESafety Requirements
NONEProcedure
Refer to Figure.
Surface B to be dry film lubricated. Mask off surfaces that will not be coated with the dry film lubricant.
Refer to the SPM TASK 70-38-03-380-501.
Apply the dry film lubricant coating, 0.00012 to 0.0003 in. (0.003 to 0.008 mm) in thickness.
SUBTASK 72-32-54-330-052 Dry Film Lubricant Coat
Figure: Nut, coating
Nut, coating
