TASK 72-32-60-300-006 LPC Bleed Screen - Replace The Screw Retainers And Screws, Repair-006 (VRS1314)

DMC:V2500-A0-72-32-6002-00A-920A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-60-300-006 LPC Bleed Screen - Replace The Screw Retainers And Screws, Repair-006 (VRS1314)

Effectivity

FIG/ITEM

PART NO.

01-330

5W2195

01-330

5W2291

Material of component

RR

DESCRIPTION

SYMBOL

MATERIAL

Screen

CFRP and KEVLAR 49

General

Price and availability - none

The practices and processes referred to in the procedure by the TASK number are in the SPM.

For the method to clean the parts, refer to TASK 72-32-60-100-000 (CLEANING-000).

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NameManufacturerPart Number / IdentificationQuantityRemark
Retainer, screw5W22493
ScrewNAS1101E04-33

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-60-350-059 Remove the Damaged Screws and the Damaged Screw Retainers

    1. Refer to Figure.

    2. Remove the damaged screw and the damaged screw retainer.

    2. SUBTASK 72-32-60-350-060 Install the New Screws and the New Screw Retainers

    1. Refer to Figure.

    2. Install the new screw to the screen.

    3. NOTE

      Make sure that the screw is retained correctly with the screw retainer on the screen.

      Tight fit the new screw retainer to the screw.

    3. SUBTASK 72-32-60-220-076 Examine the Screws and the Screw Retainer

    1. Refer to Figure.

      2. Examine the screw and the screw retainer.

      1. Refer to TASK 72-32-60-200-000 (INSPECTION-000).

    4. Figure: Replacement of the screws and the screw retainers

    Replacement of the screws and the screw retainers

    Figure: Replacement of the screws and the screw retainers

    Replacement of the screws and the screw retainers

Requirements After Job Completion

Follow-On Conditions

NONE
Link not Found
Link not Found
Link not Found