DMC:V2500-A0-72-32-8200-00A-243A-C|Issue No:001|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-82-300-002 LPC Blades - Replace The Dry Film Lubricant, Repair-002 (VRS1387)

Effectivity

FIG/ITEM	PART NO.
01-100	5R0045
01-100	5R7104
01-250	5R0023
01-250	5R0043
01-250	5R7105
01-400	5A0162
01-400	5A0173
01-400	5A1507
01-400	5A5444
02-100	5R0180
02-250	5R0091
02-400	5A1445
02-550	5A0865

Material of component

PART IDENT	SYMBOL	MATERIAL
LPC stage 1.5 blade		Titanium alloy
LPC stage 2.0 blade		Titanium alloy
LPC stage 2.3 blade		Titanium alloy
LPC stage 2.5 blade		Titanium alloy

General

Price and Availability - none

The practice and processes referred to in the procedure by the TASK numbers are in the SPM.

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

Name	Manufacturer	Part Number / Identification
Dry film lubricant spraying equipment	LOCAL	Dry film lubricant spraying equipment
Shot peening equipment	LOCAL	Shot peening equipment
Oven	LOCAL	Oven

Consumables, Materials and Expendables

Name	Manufacturer	Part Number / Identification
CoMat 01-124 ISOPROPYL ALCOHOL	LOCAL	CoMat 01-124
CoMat 02-002 ADHESIVE TAPE GENERALPURPOSE PAPER	LOCAL	CoMat 02-002
CoMat 02-003 ADHESIVE TAPE BLACK WATERPROOF	LOCAL	CoMat 02-003
CoMat 02-019 TAPE, ADHESIVE PAPER HEAT RESISTING MASKING	94960	CoMat 02-019
CoMat 05-030 CAST STEEL SHOT DELETED	0AM53	CoMat 05-030
CoMat 07-009 THINNER	LOCAL	CoMat 07-009
CoMat 10-004 DRY FILM LUBRICANT	LOCAL	CoMat 10-004

Spares

NONE

Safety Requirements

NONE

Procedure

1. 1. Refer to TASK 72-32-82-100-000 (CLEANING-000).
1. Refer to Figure.
2. 1. Use a clean cloth which is moistened with CoMat 01-124 ISOPROPYL ALCOHOL and make clean coating area.
3. 1. Use CoMat 02-019 TAPE, ADHESIVE PAPER HEAT RESISTING MASKING or CoMat 02-002 ADHESIVE TAPE GENERALPURPOSE PAPER.
4. 1. Refer to the SPM TASK 70-38-03-380-501.
    Use CoMat 10-004 DRY FILM LUBRICANT and CoMat 07-009 THINNER.
    The thickness of dry film lubricant is to be 0.0003 to 0.0012 in. (0.008 to 0.030 mm).
5. Remove masking tape.
6. 1. Stove for two hours between 365 to 383 deg F (185 to 195 deg C).
7. 1. Refer to the SPM TASK 70-38-03-380-501.

Apply dry film lubricant to the area and location of LP compressor stage blades

Requirements After Job Completion

Follow-On Conditions

NONE

Manufacturer Code:	0AM53
Enterprise Name:	IAE INTERNATIONAL AERO ENGINES AG
BU Name:	NULL
Building:	SUITE 400
Street:	628 HEBRON AVENUE
City:	GLASTONBURY
State:	CT
Zip Code:	06033
Country:	USA

Manufacturer Code:	94960
Enterprise Name:	3M TRAFFIC CONTROL
BU Name:	3M TRAFFIC CONTROL
Department:	MATERIALS DIVISION
Building:	225 55
Street:	3M CENTER
City:	ST PAUL
State:	MN
Zip Code:	55144-1000
Country:	USA
Phone Number:	1-612-733-0477
Internet:	www.3m.com/tcm

Manufacturer Code:	LOCAL
Enterprise Name:	LOCALLY SUPPLIED

Manufacturer Code:

LOCAL

Supply Number:

CoMat 01-124

Type:

sp01

Supply Name:

CoMat 01-124 ISOPROPYL ALCOHOL

Specification Groups:

Doc Number	Type
OMAT:1/40	GPR TECHNICAL GRADE
PMC 9094	GPR TECHNICAL GRADE
JCR-011	GPR TECHNICAL GRADE

Suppliers:

Manufacturer	Remarks
LOCAL
U1185
24853
K6835

Manufacturer Code:

LOCAL

Supply Number:

CoMat 02-002

Type:

sp01

Supply Name:

CoMat 02-002 ADHESIVE TAPE GENERALPURPOSE PAPER

Specification Groups:

Doc Number	Type
JCR-198	SCOTCH 202 PREMIUM GRADE (A-A-883 TYPE I)
OMAT: 237	SCOTCH 202 PREMIUM GRADE (A-A-883 TYPE I)

Suppliers:

Manufacturer	Remarks
LOCAL
94960
K0993
K6835

Manufacturer Code:

LOCAL

Supply Number:

CoMat 02-003

Type:

sp01

Supply Name:

CoMat 02-003 ADHESIVE TAPE BLACK WATERPROOF

Specification Groups:

Doc Number	Type
OMAT: 285	ISATAPE 160

Suppliers:

Manufacturer	Remarks
LOCAL
IE305
K6835

Manufacturer Code:

76381

Supply Number:

CoMat 02-019

Type:

sp01

Supply Name:

CoMat 02-019 TAPE, ADHESIVE PAPER HEAT RESISTING MASKING

Specification Groups:

Doc Number	Type
OMAT: 2/40 (RR REF)	SELLOTAPE 2595 SCAPA 2595 OR 3M HT214
JCR-201 (JAEC REF)	SELLOTAPE 2595 SCAPA 2595 OR 3M HT214

Suppliers:

Manufacturer	Remarks
76381
K3312
K6835

Manufacturer Code:

0AM53

Supply Number:

CoMat 05-030

Type:

sp01

Supply Name:

CoMat 05-030 CAST STEEL SHOT DELETED

Specification Groups:

Doc Number	Type
	DELETED

Suppliers:

Manufacturer	Remarks
0AM53

Manufacturer Code:

K3504

Supply Number:

CoMat 07-009

Type:

sp01

Supply Name:

CoMat 07-009 THINNER

Specification Groups:

Doc Number	Type
	IP 9151

Suppliers:

Manufacturer	Remarks
K3504
K6835
00BB6

Manufacturer Code:

00BB6

Supply Number:

CoMat 10-004

Type:

sp01

Supply Name:

CoMat 10-004 DRY FILM LUBRICANT

Specification Groups:

Doc Number	Type
PL237-R1 or P237-R2

Suppliers:

Manufacturer	Remarks
00BB6
K3504
K6835

Manufacturer Code:	LOCAL
Tool Number:	Dry film lubricant spraying equipment
Tool Name:	Dry film lubricant spraying equipment

Manufacturer Code:	LOCAL
Tool Number:	Oven
Tool Name:	Oven

Manufacturer Code:	LOCAL
Tool Number:	Shot peening equipment
Tool Name:	Shot peening equipment

TASK 72-32-82-300-002 LPC Blades - Replace The Dry Film Lubricant, Repair-002 (VRS1387)

Export Control

Copyright

Applicability

Common Information

TASK 72-32-82-300-002 LPC Blades - Replace The Dry Film Lubricant, Repair-002 (VRS1387)

Effectivity

Material of component

General

NOTE

Preliminary Requirements

Pre-Conditions

Support Equipment

Consumables, Materials and Expendables

Spares

Safety Requirements

Procedure

SUBTASK 72-32-92-100-053 Remove Dry Film Lubricant

SUBTASK 72-32-82-380-053 Apply Dry Film Lubricant to the LPC Blades

Figure: Apply dry film lubricant to the area and location of LP compressor stage blades

Apply dry film lubricant to the area and location of LP compressor stage blades

Requirements After Job Completion

Follow-On Conditions