DMC:V2500-A0-72-32-8300-00A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-83-100-003 LPC Cases And Stators - Clean The LPC Rear Case And Mid Case, Cleaning-003
General
This TASK gives the procedure to clean the LPC rear case assembly and LPC mid case assembly.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
References
Refer to the SPM for data on these items.
Cleaning Policy and Methods, SPM TASK 70-10-00-100-501 and SPM TASK 70-11-14-300-503
NOTE
Consumable materials are given in the SPM TASK 70-11-03-300-503
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Clean the LPC rear case assembly and LPC mid case assembly. Refer to the SPM TASK 70-11-03-300-503
SUBTASK 72-32-83-110-051 Chemically Clean the LPC Rear Case Assembly and LPC Mid Case Assembly