TASK 72-32-86-300-007 Intermediate Structure Rear Fairing - Patch Repair The Crack And Missing Material At Seal Surface, Repair-007 (VRS1939)

DMC:V2500-A0-72-32-8600-00A-970A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-86-300-007 Intermediate Structure Rear Fairing - Patch Repair The Crack And Missing Material At Seal Surface, Repair-007 (VRS1939)

Effectivity

FIG/ITEM

PART NO.

01-100

5A1370

01-100

5A1688

01-100

5A1755

Material of component

PART IDENT

SYMBOL

MATERIAL

Rear fairing assembly

Resin impregnated carbon fiber fabric

General

This Repair must only be done when the instruction to do so is given in 72-32-86, Inspection.

This is a Source Demonstration Repair which can only be done by approved vendors.

The practices and processes referred to in the procedure by the TASK are in the SPM.

Price and availability - Refer to International Aero Engines IAE

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The Source Demonstration requirements of this repair means that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility

      IAE - INTERNATIONAL AERO ENGINES AG
      C/O ROLLS-ROYCE DEUTSCHLAND LTD. CO KG
      ESCHENWEG 11, DAHLEWITZ
      D-15827 BLANKENFELDE-MAHLOW
      GERMANY

      ATTN: MANAGER TECHNICAL SERVICES

    2. Authorized Repair Vendor for Repair VRS1939 is listed below:

      IHI corporation
      229 TONOGAYA, MIZUHO-MACHI
      NISHITAMA-GUN
      TOKYO 190-1297
      JAPAN
      ATTN: CUSTOMER SUPPORT MANAGER, MAINTENANCE DEPARTMENT, CIVIL AERO-ENGINE DIVISION, AERO-ENGINE AND SPACE OPERATIONS
      Tel: 81-42-568-7362
      Fax: 81-42-568-7566

    3. The designation by IAE of an Authorized Repair Vendor indicates that the Repair Vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the Repair Vendors to carry out the repair work, and accepts no responsibility whatsoever for any work that may be carried out by a Repair Vendor other than when IAE is listed as the Repair Vendor. Authorized Repair Vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE