TASK 72-41-32-300-021 HPC Inlet Variable Stator Vane - Repair Worn/Damaged Inner And/or Outer Pivot Journal By Metal Spray, Repair-021 (VRS9128) (Vendor Application)

DMC:V2500-A0-72-41-3201-00A-970A-C|Issue No:002.00|Issue Date:2020-02-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-41-32-300-021 HPC Inlet Variable Stator Vane - Repair Worn/Damaged Inner And/or Outer Pivot Journal By Metal Spray, Repair-021 (VRS9128) (Vendor Application)

Effectivity

FIG/ITEM

PART NO.

01-500

6A4201

01-500

6A5653

01-500

6A7723

01-500

6A8405

01-500

6B1269

01-600

6A4203

01-600

6A5655

01-600

6A7725

01-600

6A8407

01-600

6B1270

Material of component

PART IDENT

SYMBOL

MATERIAL

HPC Inlet Variable Stator Vane

TAF

Titanium Alloy

Stud

EAL

Stainless Steel

Insert

Nickel Alloy

General

CAUTION

DO NOT DO THIS REPAIR TO BOTH THE INNER JOURNAL AND OUTER JOURNAL AT THE SAME TIME. IF BOTH JOURNALS ARE DAMAGED, DO NOT REPAIR THE INNER JOURNAL UNTIL THE OUTER JOURNAL HAS BEEN FULLY REPAIRED.

Price and availability - Refer to IAE

The practices and processes referred to in the procedure by the TASK numbers are in SPM.

Preliminary Requirements

Pre-Conditions

Action/ConditionData Module/Technical Publication
Make sure that all the cleaning and inspection procedures are done before this repair.

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The proprietary nature of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below, or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      M/S 121-10

      East Hartford CT 06118

      U.S.A.

      Attn: Manager Technical Services

    2. Authorized repair vendors for VRS9128 are listed below:

      Pratt & Whitney Component Solutions (PWCS)

      61 Seletar Aerospace View

      Singapore

    3. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work, and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Added repair vendors information. (19VG277)