Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-41-32-300-019 Stage 4 HPC Variable Stator Vane, Inner and/or Outer Pivot Journal Wear/Damage, Plasma Spray Repair, Repair-019 (VRS9130) (Vendor Application)
Effectivity
FIG/ITEM | PART NO. |
|---|---|
03-500 | 6A4370 |
03-500 | 6A5679 |
03-500 | 6A7478 |
03-500 | 6A7558 |
03-500 | 6A8731 |
03-500 | 6A8837 |
03-500 | 6B1274 |
03-600 | 6A8838 |
03-600 | 6B1275 |
Material of Component
PART IDENT | SYMBOL | MATERIAL |
|---|---|---|
HP Compressor Stage 4 Variable Stator Vane | EYG | Heat Resisting Alloy |
General
CAUTION
Price and availability - Refer to IAE.
The practices and processes referred to in the procedure by the TASK number are in SPM.
Preliminary Requirements
Pre-Conditions
| Action/Condition | Data Module/Technical Publication |
|---|---|
| Make sure that all the cleaning and inspection procedures are done before this repair. |
Support Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
The proprietary nature of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.
IAE International Aero Engines AG
400 Main Street
M/S 121-10
East Hartford CT 06118
U.S.A.
Attn: Manager Technical Services
Authorized repair vendor for Repair VRS9130 is listed below:
Pratt & Whitney Component Solutions (PWCS)
61 Seletar Aerospace View
Singapore
The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.
Repair Facilities