DMC:V2500-A0-72-42-2051-01A-920A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-42-20-300-006 No. 4 Bearing Compartment Cooling Air Tube - Replace The Thrust Wire Tube Nut, Repair-006 (VRS3435)
General
Price and availability - refer to IAE.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Air hammers | LOCAL | Air hammer | ||
| Anvil | LOCAL | Anvil | ||
| Mallet | LOCAL | Mallet |
Consumables, Materials and Expendables
NONESpares
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| NUT, TUBE COUPLING | U1653 | AS15706 | 1 | |
| WIRE, THRUST | U1653 | AS15782 | 1 |
Safety Requirements
NONEProcedure
Refer to Figure.
Cut off the worn or damaged tube nut.
SUBTASK 72-42-20-350-053 Remove the Damaged Thrust Wire Tube Nut
Refer to Figure. Position the wire in the hole in the tube nut. Use a Mallet or anAir hammers and an Anvil to move the AS15782 WIRE, THRUST into position.
Install the new nut with thrust wire.
SUBTASK 72-42-20-350-054 Install a New Nut on the No.4 Bearing Cooling Tube
Refer to Figure and Inspection-000TASK 72-42-20-200-100.
Examine the No.4 bearing cooling tube for the correct installation of the thrust wire tube nut.
SUBTASK 72-42-20-220-111 Examine the Repair
Figure: No.4 Bearing Cooling Tube Thrust Wire Tube Nut Replacement
No.4 Bearing Cooling Tube Thrust Wire Tube Nut Replacement
