TASK 72-42-50-300-008 HPC Rear Static Seal - Replace The Inner Seal Carrier Feltmetal, Repair-008 (VRS9205)

DMC:V2500-A0-72-42-5001-03A-920A-C|Issue No:002.00|Issue Date:2018-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-42-50-300-008 HPC Rear Static Seal - Replace The Inner Seal Carrier Feltmetal, Repair-008 (VRS9205)

Effectivity

FIG/ITEM

PART NO.

01-100

6A4447

01-100

6B1412

Material of component

PART IDENT

IAE SYMBOL

MATERIAL

Support Cone

QAL, QAW

Nimonic 80A

Inner Seal Carrier

QAH, QAU

C263

General

This is a source demonstration repair which can only be done by authorized repair vendors whose personnel have the necessary approvals.

Price and Availability - none

This repair scheme gives the procedure for replacement for worn inner seal carrier feltmetal of the HPC rear static seal.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The source demonstration requirements of this repair mean that any facility not authorized to accomplish the repair either utilize the authorized repair vendors listed, or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      M/S 121-10

      East Hartford CT 06118

      U.S.A.

      Attn: Manager Technical Services

    2. Authorized repair vendors for repair VRS9205 are listed below:

      Asian Compressor Technologies Services Co., Ltd. (ACTS)

      1 Industrial 3rd Road

      Mail Stop 107-57

      Kuanyin Industrial Park

      Taoyuan Hsien, Taiwan

      Tel: 886-3-483-2310

      Fax: 886-3-483-1463

    3. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representation concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other then when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Updated IAE address. (Editorial)