DMC:V2500-A0-72-43-1400-01A-609A-C|Issue No:001|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-43-14-300-005 No. 4 Bearing Rear Seal Seat - Restore The Hardface, Repair-005 (VRS3694)

Effectivity

FIG/ITEM	PART No.
01-020	2A0067
01-020	2A1999
01-020	2A3433

Material of component

General

Repair Facilities

The Source Demonstration requirements of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Engineering to determine if a qualification program can be initiated at their facility.

IAE International Aero Engines
AG

c/o Rolls-Royce Deutschland
Ltd und Co KG

Eschenweg
11

Dahlewitz

15827 Blankenfelde-Mahlow

Germany

ATTN: Manager
Technical Services

Authorized repair vendors for Repair VRS3694 are listed below:

Praxair Surface Technologies

1234 Atlantic Street

North Kansas City, MO 64116-4142

USA

WGI, Inc. (formerly Westfield Gage
Company, Inc.)

34 Hudson
Drive

Southwick, MA 01077

Tel: (413) 569 0444

Fax: (413) 569 9369

The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

CAUTION

IT IS TO BE UNDERSTOOD THAT INTERNATIONAL AERO ENGINES DOES NOT ENDORSE THE WORK PERFORMED BY THE COMPANY OR COMPANIES NAMED HEREIN OR ANY OTHER COMPANY AND DOES NOT ACCEPT RESPONSIBILITY TO ANY DEGREE FOR THE SELECTION OF SUCH COMPANY OR COMPANIES FOR THE PERFORMANCE OF ANY WORK OR PROCUREMENT OF SUPPLIES.

CAUTION

THE CRITICAL NATURE OF THIS REPAIR REQUIRES EACH FACILITY INTENDING TO ACCOMPLISH THIS REPAIR TO CONTACT THE IAE MANAGER OF REPAIR DEVELOPMENT BEFORE INITIATING REPAIR PROCEDURES.

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE