TASK 72-44-20-300-012 HPT Stage 1 Vane - Platform Touch-Up Coating Repair, Repair-012 (VRS3607)

DMC:V2500-A0-72-44-2000-01A-609A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-44-20-300-012 HPT Stage 1 Vane - Platform Touch-Up Coating Repair, Repair-012 (VRS3607)

Effectivity

FIG/ITEM

PART NO.

01-240

2A5591

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT Vane Cluster Assembly

-

Cast Cobalt Alloy

General

Price and Availability - Refer to IAE

The practices and processes referred to in the procedure by the TASK number are in the SPM

NOTE

The application of IAE 265 is intended to provide an expedient and economical method for local airfoil coating touch-up repairs

NOTE

It may be used only when there is no visual evidence of oxidation or corrosion degradation of base metal

NOTE

In no case shall the application of IAE 265 be used as a substitute for the primary coating systems during complete coating refurbishment

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The proprietary nature of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility

      IAE International Aero Engines AG
      400 Main Street M/S 121-10
      East Hartford, CT 06108
      USA
      ATTN: Manager Maintenance Operations

    2. Authorized repair vendors for Repair VRS3607 are listed below:

      Pratt and Whitney Engine Services
      North Haven Airfoil Repair Operation
      415 Washington Avenue
      North Haven, CT 06473 USA
    3. The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other then when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE
Requirements After Job Completion
Follow-On Conditions
NONE