TASK 72-45-00-300-003 HPT Stage 2 Air Seal - Repair The Coating On The Knife Edges, Repair-003 (VRS3209)

DMC:V2500-A0-72-45-0012-00A-609A-C|Issue No:004.00|Issue Date:2017-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-00-300-003 HPT Stage 2 Air Seal - Repair The Coating On The Knife Edges, Repair-003 (VRS3209)

Effectivity

FIG/ITEM PART NO.

01-080

2A4157

01-080

2A4196

01-080

2A4197

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 2 HPT Air Seal

-

Nickel Alloy

General

Price and availability - not applicable

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Holding fixtureLOCALHolding fixture
OhmmeterLOCALOhmmeter
Plasma spray facilityLOCALPlasma spray facility

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The Source Demonstration requirements of this repair mean that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      Mail Stop 121-10

      East Hartford CT 06118

      USA

      Email: gpiaecomms@iaev2500.com

      Attn: Manager, Maintenance Operations

    2. Authorized Repair Vendors for Repair VRS3209 are listed below:

      General Plasma Associates

      12 Thompson Road

      East Windsor, CT 06088 USA

      MTU Maintenance Gmbh

      Airport Hannover

      Munchner Strasse 31

      30855 Langenhagen

      Germany

      ATTN: Program Manager, V2500

      IHI corporation

      229 Tonogaya Mizuho-Machi

      Nishitama-gun,

      Tokyo, Japan 190-1297

      Tel: 81-42-568-7362

      Fax: 81-42-568-7566

      Pratt & Whitney Global Service Partners

      East Hartford Repair Operations (GSP-EHRO)

      400 Main Street, WELL 11, Mail Stop 165-04

      East Hartford CT 06118 USA

      Tel: (860) 557-2646

      Fax: (860) 557-2647

    3. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the full procedure. (16VC428A)

Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Tool Number:Holding fixture
Tool Name:Holding fixture
Manufacturer Code:LOCAL
Tool Number:Ohmmeter
Tool Name:Ohmmeter
Manufacturer Code:LOCAL
Tool Number:Plasma spray facility
Tool Name:Plasma spray facility