TASK 72-45-11-200-000 HPT Stage 1 Hub - The Table Of Part Numbers/Task Numbers, Inspection-000

DMC:V2500-A0-72-45-1100-00A-300A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-11-200-000 HPT Stage 1 Hub - The Table Of Part Numbers/Task Numbers, Inspection-000

General

The part number table gives the breakout, configuration and TASK number where the applicable data for a part is given. It is given to help find the procedure only.

Before starting a procedure, refer to EFFECTIVITY statement contained in each TASK to make sure of the approved procedure part number applicability.

FIG/ITEM PART NO. BREAKOUT CONFIG TASK NO.

01-011

2A1101

01

01

TASK 72-45-11-200-001-A00

01-010

2A1121

01

01

TASK 72-45-11-200-001-A00

01-011

2A1901

01

02

TASK 72-45-11-200-001-B00

01-010

2A2021

01

02

TASK 72-45-11-200-001-B00

01-011

2A1801

01

03

TASK 72-45-11-200-011-C00

01-010

2A2221

01

03

TASK 72-45-11-200-001-C00

01-011

2A2201

01

04

TASK 72-45-11-200-001-D00

01-011

2A2801

01

04

TASK 72-45-11-200-001-D00

01-011

2A5001

01

04

TASK 72-45-11-200-001-D00

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE