TASK 72-45-12-300-003 HPT Stage 1 Rotating Outer Airseal - Repair The Knife Edge Seal, Repair-003 (VRS3726)

DMC:V2500-A0-72-45-1201-00A-970A-C|Issue No:002.00|Issue Date:2017-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-12-300-003 HPT Stage 1 Rotating Outer Airseal - Repair The Knife Edge Seal, Repair-003 (VRS3726)

Effectivity

FIG/ITEM PART NO.

01-040

2A0488

01-040

2A1105

01-040

2A1271

01-040

2A1350

01-040

2A3423

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT Airseal (Outer)

-

Nickel Alloy

General

Price and availability - refer to IAE

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The source demonstration requirements of this repair mean that any facility not authorized to accomplish this repair either utilize the authorized repair vendors listed below or contact the IAE repair development group to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      Mail Stop 121-10

      East Hartford CT 06118

      USA

      Email: gpiaecomms@iaev2500.com

      Attn: Manager, Maintenance Operations

    2. Authorized repair vendors for repair VRS3726 are listed below:

      Pratt and Whitney Global Service Partners

      East Hartford Repair Operations (GSP-EHRO)

      400 Main Street, Well No.14 - Mail Stop 117-62

      East Hartford, CT 06108

      USA

      Tel: (860) 557-2646

      Fax: (860) 557-2647

      Pratt and Whitney Global Service Partners (GSP)

      North Berwick Part Repair Operations (NBPRO)

      113 Wells Street (Route 9) - Mail Stop 802-32

      North Berwick, ME 03906

      USA

      Tel: (207) 676-4266

      Fax: (860) 755-7133

    3. The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Updated IAE address. (16VC393)