TASK 72-45-12-300-008 HPT Stage 1 Rotating Outer Air Seal - Plasma Spray The Blade Mating Surface, Repair-008 (VRS3407)

DMC:V2500-A0-72-45-1201-01A-609A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-12-300-008 HPT Stage 1 Rotating Outer Air Seal - Plasma Spray The Blade Mating Surface, Repair-008 (VRS3407)

Effectivity

FIG/ITEM PART NO.

01-040

2A3423

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT Air Seal (Outer)

-

Nickel alloy

General

Price and availability - refer to IAE

Repair Facilities

The Source Demonstration requirements of this repair mean that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

IAE International Aero Engines AG
c/o Rolls-Royce Deutschland Ltd und Co KG
Eschenweg 11
Dahlewitz
15827 Blankenfelde-Mahlow
Germany
ATTN: Manager Technical Services

Authorized Repair Vendors for Repair VRS3407 are listed below:

Pratt and Whitney Global Service Partners
East Hartford Repair Operations (GSP-EHRO)
400 Main Street, WELL #11 - Mail Stop 165-04
East Hartford, CT 06108
USA
Tel: (860) 557-2646
Fax: (860) 557-2647

The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for work that is carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE