TASK 72-45-14-300-011 HPT Stage 1 Blade - Repair The Corrosion Under The Platform And Internal U Channel Borescope Inspection, Repair-011 (VRS3484)

DMC:V2500-A0-72-45-1401-02A-970A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-14-300-011 HPT Stage 1 Blade - Repair The Corrosion Under The Platform And Internal U Channel Borescope Inspection, Repair-011 (VRS3484)

Effectivity

FIG/ITEM

PART NO.

01-010

2A2621

01-010

2A2621-001

01-010

2A2621-002

01-010

2A2621-003

01-010

2A2621-004

01-010

2A8321

01-010

2A8321-001

01-010

2A8321-002

01-010

2A8321-003

01-010

2A8321-004

01-010

2A8521

01-010

2A8521-001

01-010

2A8521-002

01-010

2A8521-003

01-010

2A8521-004

01-010

2A8521-005

01-010

2A8701

01-010

2A8701-001

01-010

2A8701-002

01-010

2A8801

01-010

2A9001

01-010

2A9101

01-010

2A9201

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT blade

Wrought non-hardening nickel base alloy

General

Repair the Stage 1 HPT Blade

The Source Demonstration requirements of this repair mean that any facility not authorized to accomplish this repair either utilize the Authorised Repair Vendors listed below or contact IAE Manager Repair Development to determine if a qualification program can be initiated at their facility.

IAE International Aero Engines AG
c/o Rolls-Royce Deutschland Ltd und Co KG
Eschenweg 11
Dahlewitz
15827 Blankenfelde-Mahlow
Germany
ATTN: Manager Technical Services

Authorized repair vendors for Repair VRS3484 are listed below:

Pratt and Whitney Global Service Partners
Dallas Airfoil Repair Operations (GSP-DARO)
1177 N.Great Southwest Parkway
Grand Prairie
Texas 75050
USA
Mailstop: 970-00
Tel: 972-343-2026
Fax: 972-343-1301

MTU - Maintenance GmbH
Flughafen Hannover
Muenchner Strasse 31
D-30855 Langenhagen
Germany
Tel: 49 511 7806 0
Fax: 49 511 7806 111

Turbine Overhaul Services Pte, Ltd. (TOS)
5 Tuas Drive Two - Mail Stop 107-58
Singapore 638639
Tel: 65-6860-2260
Fax: 65-6862-1068

The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE