TASK 72-45-14-300-020 HPT Stage 1 Blade - Repair The Underplatform Protective Coating, Repair-020 (VRS3581)

DMC:V2500-A0-72-45-1401-07A-609A-C|Issue No:004.00|Issue Date:2018-02-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-14-300-020 HPT Stage 1 Blade - Repair The Underplatform Protective Coating, Repair-020 (VRS3581)

Effectivity

FIG/ITEM

PART NO.

01-010

2A8321-003

01-010

2A8321-004

01-010

2A8701-001

01-010

2A8701-002

01-010

2A9001

01-010

2A9101

01-010

2A9201

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT Blade Assembly

-

Cast Nickel Based Alloy

General

Price and Availability - refer to IAE.

The practices and processes referred to in the procedure by the TASK number are in the SPM.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The proprietary nature of this repair requires that all facilities not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact IAE Repair Development Group to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      M/S 121-10

      East Hartford CT 06118

      U.S.A.

      Attn: Manager Technical Services

    2. Authorized repair vendors for Repair VRS3581 are listed below:

      Turbine Overhaul Services Pte, Ltd. (TOS)

      5 Tuas Drive Two - Mail Stop 107-58

      Singapore 638639

      Tel: 65-6860-2260

      Fax: 65-6862-1068

      MTU-Hannover

      Muenchner Strasse 31

      30855 Langenhagen

      Germany

    3. The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other then when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the repair facilities to update vendor addresses. (17VC137)