TASK 72-45-20-440-000 HPT Case And Vane Assembly - Assemble The Case And Vane Assembly, Assembly-000

DMC:V2500-A0-72-45-2000-00A-710A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-20-440-000 HPT Case And Vane Assembly - Assemble The Case And Vane Assembly, Assembly-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Assembly of the A1 Model HP Turbine Case and Vane Assembly is contained in the following TASKS:

    1. Assemble the HP Turbine Case and Duct Segments for Grinding TASK 72-45-20-440-001-A00 (ASSEMBLY-001, CONFIG-001)

    2. Final Assemble the HP Turbine Case and Vane Assembly TASK 72-45-20-440-002-A00 (ASSEMBLY-002, CONFIG-001)

    2. Information for the Assembly of the A5 Model HP Turbine Case and Vane Assembly is contained in the following TASKS:

    1. Assemble the HP Turbine Case and Duct Segments for Grinding TASK 72-45-20-440-001-B00 (ASSEMBLY-001, CONFIG-002)

    2. Final Assemble the HP Turbine Case and Vane Assembly TASK 72-45-20-440-002-B00 (ASSEMBLY-002, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE