TASK 72-45-32-300-008 HPT Stage 2 Blade - Replace The Blade Root Cover Plate, Repair-008 (VRS3361)

DMC:V2500-A0-72-45-3201-00A-920A-C|Issue No:003.00|Issue Date:2018-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-32-300-008 HPT Stage 2 Blade - Replace The Blade Root Cover Plate, Repair-008 (VRS3361)

Effectivity

FIG/ITEM

PART NO.

01-010

2A0402

01-010

2A0402-001

01-010

2A1102

01-010

2A1102-001

01-010

2A1102-002

01-010

2A2202

01-010

2A2202-001

01-010

2A2202-002

01-010

2A2202-003

01-010

2A2702

01-010

2A2702-001

01-010

2A8702

01-010

2A8602

01-010

2A8902

01-010

2A9002

01-010

2A4422

01-010

2A4722

01-010

2A4822

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 2 HPT blade assembly

-

Wrought non-hardening nickel base alloy

General

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair facilities

    1. The source demonstration requirements of this repair mean that any facility not authorized to accomplish this repair either utilize the authorized repair vendors listed below or contact IAE at the following address to determine if a qualification program can be initiated at their facility.

      IAE International Aero Engines AG

      400 Main Street

      M/S 121-10

      East Hartford CT 06118

      U.S.A.

      Attn: Manager Technical Services

    2. Authorized repair vendors for Repair VRS3361 (for PN 2A0402, 2A0402-001, 2A1102, 2A1102-001, 2A1102-002, 2A8602 and 2A8902) are listed below:

      Sequa Corp.

      Chromalloy Research and Technology Div.

      108 Blaisdell Road

      Orangeburg, New York 10962

      USA

      Tel: (845) 359-4700

      Fax: (845) 359-4409

      Dallas Airfoil Repair Operations

      Pratt and Whitney Services, Inc.

      1177 Great Southwest Pkwy.

      Grand Prairie, TX 75050

      Mailstop: 970-00

      Tel: 972-343-2026

      Fax: 972-343-1301

      MTU MAINTENANCE HANNOVER GmbH

      Flughafen Hannover

      Muenchner Strasse 31

      D-30855 Langenhagen

      Germany

      Tel: 49 511 7806 0

      Fax: 49 511 7806 111

      The following vendors are only approved for the GTAW-MA weld method for this repair:

      Turbine Overhaul Services Pte, Ltd. (TOS)

      5 Tuas Drive Two - Mail Stop 107-58

      Singapore 638639

      Tel: 65-6860-2260

      Fax: 65-6862-1068

    3. Authorized repair vendors for Repair VRS3361 (for PN 2A2202, 2A2202-001, 2A2202-002, 2A2202-003, 2A2702, 2A2702-001, 2A4422, 2A4722, 2A4822, 2A8702 and 2A9002) are listed below:

      Dallas Airfoil Repair Operations

      Pratt and Whitney Services, Inc.

      1177 Great Southwest Pkwy.

      Grand Prairie, TX 75050

      USA

      Mailstop: 970-00

      Tel: 972-343-2026

      Fax: 972-343-1301

      MTU MAINTENANCE HANNOVER GmbH

      Flughafen Hannover

      Muenchner Strasse 31

      D-30855 Langenhagen

      Germany

      Tel: 49 511 7806 0

      Fax: 49 511 7806 111

      The following vendors are only approved for the GTAW-MA weld method for this repair:

      Turbine Overhaul Services Pte, Ltd. (TOS)

      5 Tuas Drive Two - Mail Stop 107-58

      Singapore 638639

      Tel: 65-6860-2260

      Fax: 65-6862-1068

    4. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Added PN 2A4722 and 2A4822. (17VC501)