TASK 72-60-23-300-001 Hydraulic Pump Drive Gear Housing - Repair The Surfaces Of The Hydraulic Pump Drive Housing, Repair-001 (VRS5034)

DMC:V2500-A0-72-60-2304-00A-649A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-60-23-300-001 Hydraulic Pump Drive Gear Housing - Repair The Surfaces Of The Hydraulic Pump Drive Housing, Repair-001 (VRS5034)

Effectivity

FIG/ITEM PART NO.

01-460

4B0192

01-460

4B0313

01-460

4B0350

01-460

4B0372

Material of component

RR

DESCRIPTION SYMBOL MATERIAL

Hydraulic pump housing

-

A357 T61

(AMS 4219)

General

Price and availability - none

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-140 TRIANGULAR INDIA STONE, FINE GRITLOCALCoMat 02-140

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-60-23-350-051 Repair the Hydraulic Pump Housing (01-460) Rough Surfaces at Location 1

    1. Refer to: Figure

      2. Hand polish and blend. The maximum depth of the blending is 0.037 in. (0.94 mm).

    2. SUBTASK 72-60-23-350-052 Repair the Hydraulic Pump Housing (01-460) Machined surfaces

    1. Refer to: Figure

      2. Not seal surfaces at location 2.

        1. Hand polish and blend. The maximum depth of the blending is 0.010in. (0.25 mm).

      3. Seal surfaces at location 3.

        1. Hand polish and blend. The maximum depth of the blending is 0.005in. (0.13 mm).

    3. Figure: Repair Details and Dimensions

    Repair Details and Dimensions

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:CoMat 02-140
Type:sp01
Supply Short Name:CoMat 02-140 TRIANGULAR INDIA STONE, FINE GRIT
Supply Name:CoMat 02-140 TRIANGULAR INDIA STONE, FINE GRIT
Specification Groups:
Doc NumberType
NORTON TRIANGULAR ABRASIVE FILE, FINE INDIA
Suppliers:
ManufacturerRemarks
LOCAL
A2549
K5991